Component Approved Translated Unfinished Unfinished words Unfinished characters Untranslated Checks Suggestions Comments
Config_checks GPL-3.0 0% 0 0 0 0 0 0 0
Glossary Config_Reference GPL-3.0 0% 23% 349 25,436 164,438 347 0 0 0
Glossary G-Codes GPL-3.0 1% 38% 264 7,376 55,017 262 0 0 0
Overview GPL-3.0 0% 0 0 0 0 0 0 0
readme GPL-3.0 0% 0 0 0 0 0 0 0
Bed_Level GPL-3.0 0% 0 0 0 0 0 0 0
Bed_Mesh GPL-3.0 0% 4% 109 3,415 21,325 105 1 0 0
Config_Changes GPL-3.0 0% 93% 8 233 2,030 8 1 0 0
Contact GPL-3.0 0% 68% 15 537 3,526 14 0 0 0
Example_Configs GPL-3.0 0% 56% 13 580 3,785 13 0 0 0
FAQ GPL-3.0 0% 27% 80 2,508 15,980 76 0 0 0
Features GPL-3.0 0% 0% 96 1,256 8,458 95 0 0 0
Installation GPL-3.0 0% 13% 40 1,166 7,955 40 0 0 0
SDCard_Updates GPL-3.0 0% 8% 74 1,531 9,593 73 3 1 0
Slicers GPL-3.0 0% 6% 30 626 4,602 30 0 0 0
Axis_Twist_Compensation GPL-3.0 0% 0% 18 289 2,238 18 0 0 0
Beaglebone GPL-3.0 0% 42% 16 226 1,879 16 0 0 0
BLTouch GPL-3.0 0% 14% 40 2,049 12,473 40 0 0 0
Bootloader_Entry GPL-3.0 0% 0% 40 489 3,410 40 0 0 0
Bootloaders GPL-3.0 0% 11% 146 3,127 21,392 142 0 0 0
CANBUS_Troubleshooting GPL-3.0 0% 0% 32 974 6,193 32 0 0 0
Command_Templates GPL-3.0 0% 2% 75 1,546 10,833 75 1 0 0
CONTRIBUTING GPL-3.0 0% 10% 85 2,028 13,451 85 0 0 0
Debugging GPL-3.0 0% 38% 46 687 5,420 46 0 0 0
Delta_Calibrate GPL-3.0 0% 0% 62 1,550 10,327 61 0 0 0
Endstop_Phase GPL-3.0 0% 5% 19 1,001 6,147 18 0 0 0
Exclude_Object GPL-3.0 0% 0% 29 781 5,362 29 0 0 0
Hall_Filament_Width_Sensor GPL-3.0 0% 10% 18 292 2,270 18 0 0 0
index GPL-3.0 0% 16% 5 67 509 5 0 0 0
Kinematics GPL-3.0 0% 1% 70 1,827 12,447 69 1 0 0
Glossary Klipper GPL-3.0 13% 96% 2 2 17 2 0 2 0
Manual_Level GPL-3.0 0% 0% 45 1,506 8,900 44 0 0 0
Measuring_Resonances GPL-3.0 0% 1% 260 4,694 31,499 260 1 1 0
Multi_MCU_Homing GPL-3.0 0% 0% 9 366 2,343 9 0 0 0
Navigation GPL-3.0 0% 0 0 0 0 0 0 0
Pressure_Advance GPL-3.0 0% 0 0 0 0 0 0 0
Probe_Calibrate GPL-3.0 0% 2% 40 1,514 9,248 40 0 0 0
Releases GPL-3.0 0% 15% 124 1,380 10,448 124 0 0 0
Resonance_Compensation GPL-3.0 0% 18% 135 3,806 24,279 135 1 0 0
Rotation_Distance GPL-3.0 0% 0% 44 1,269 8,103 44 0 0 0
RPi_microcontroller GPL-3.0 0% 43% 34 907 7,475 34 0 0 0
Skew_Correction GPL-3.0 0% 3% 28 528 3,420 28 0 0 0
Sponsors GPL-3.0 0% 5% 17 127 1,489 17 0 0 0
Status_Reference GPL-3.0 0% 1% 214 2,859 21,892 214 0 0 0
TMC_Drivers GPL-3.0 0% 0 0 0 0 1 0 0
TSL1401CL_Filament_Width_Sensor GPL-3.0 0% 0 0 0 0 0 0 0
Using_PWM_Tools GPL-3.0 0% 15% 11 313 2,086 11 0 0 0
API_Server GPL-3.0 0% 1% 90 1,837 14,011 90 0 0 0
CANBUS GPL-3.0 0% 2% 34 829 5,128 34 0 0 0
CANBUS_protocol GPL-3.0 0% 0% 19 403 2,700 19 0 0 0
MCU_Commands GPL-3.0 0% 2% 43 2,290 14,977 42 1 0 0
Packaging GPL-3.0 0% 90% 1 18 186 1 0 0 0
Protocol GPL-3.0 0% 2% 78 2,179 14,751 77 1 0 0
Benchmarks GPL-3.0 0% 31% 131 1,459 11,129 131 0 0 0
Code_Overview GPL-3.0 0% 11% 89 4,230 28,778 89 0 0 0

Overview

Project website www.klipper3d.org
Instructions for translators

The code blocks are included in the Gettext files in case if some comments need to be translated. You can add comments as well.

For code blocks without comment, please flag them as ignore-same, if you don't the permission, comment in a GitHub PR to let me know. For links that refer to a title inside an md file, please add a Link Modification Req tag.

The Gettext and markdown files in docs/locales are specific for languages.

Check contributing for current guidelines.

To merge a translation into the main Klipper repository, certain requirements have to be met. We are still determining the requirements and no merging is planned. - Yifei Ding
Project maintainers User avatar KevinOConnor User avatar Neko-vecter User avatar dingyifei User avatar kingu
Translation license GPL-3.0 API_Server Axis_Twist_Compensation Beaglebone Bed_Level Bed_Mesh Benchmarks BLTouch Bootloader_Entry Bootloaders CANBUS CANBUS_protocol CANBUS_Troubleshooting Code_Overview Command_Templates Config_Changes Config_checks Config_Reference Contact CONTRIBUTING Debugging Delta_Calibrate Endstop_Phase Example_Configs Exclude_Object FAQ Features G-Codes Hall_Filament_Width_Sensor index Installation Kinematics Klipper Manual_Level MCU_Commands Measuring_Resonances Multi_MCU_Homing Navigation Overview Packaging Pressure_Advance Probe_Calibrate Protocol readme Releases Resonance_Compensation Rotation_Distance RPi_microcontroller SDCard_Updates Skew_Correction Slicers Sponsors Status_Reference TMC_Drivers TSL1401CL_Filament_Width_Sensor Using_PWM_Tools
an hour ago

String statistics

Strings percent Hosted strings Words percent Hosted words Characters percent Hosted characters
Total 4,323 111,847 755,901
Approved 0% 0 0% 0 0% 0
Waiting for review 25% 1,087 15% 17,725 16% 121,894
Translated 25% 1,096 15% 17,734 16% 121,982
Needs editing 1% 25 1% 570 1% 3,917
Read-only 1% 9 1% 9 1% 88
Failing checks 1% 12 1% 398 1% 2,804
Strings with suggestions 1% 4 1% 90 1% 530
Untranslated strings 74% 3,202 83% 93,543 83% 630,002
Last 12 months Previous

Activity in last 12 months

405 changes 169 changes 129 changes 42 changes 546 changes 0 changes 58 changes 0 changes 27 changes 7 changes 92 changes 1 change 60 changes 334 changes 6 changes 15 changes 93 changes 0 changes 50 changes 19 changes 42 changes 311 changes 0 changes 0 changes
Apr May Jun Jul Aug Sep Oct Nov Dec Jan Feb Mar

Quick numbers

0
Hosted words
0
Hosted strings
0%
Translated
0
Contributors
and previous 30 days

Trends of last 30 days

—
Hosted words
+100%
—
Hosted strings
+100%
—
Translated
+25%
—
Contributors
+100%
User avatar fedorovmichail50

String added

  1. Klipper
  2. Klipper Glossary
  3. Spanish
Русский
 
2 hours ago
User avatar None

Resource updated

  1. Klipper
  2. Config_Reference Glossary
  3. Spanish
The “docs/locales/es/LC_MESSAGES/Config_Reference.po” file was changed. 3 weeks ago
User avatar None

String added in the repository

  1. Klipper
  2. Config_Reference Glossary
  3. Spanish
[pwm_cycle_time my_pin]
pin:
#value:
#shutdown_value:
#cycle_time: 0.100
#scale:
# See the "output_pin" section for information on these parameters.
 
3 weeks ago
User avatar None

String added in the repository

  1. Klipper
  2. Config_Reference Glossary
  3. Spanish
Run-time configurable output pins with dynamic pwm cycle timing (one may define any number of sections with an "pwm_cycle_time" prefix). Pins configured here will be setup as output pins and one may modify them at run-time using "SET_PIN PIN=my_pin VALUE=.1 CYCLE_TIME=0.100" type extended [g-code commands](G-Codes.md#pwm_cycle_time).
 
3 weeks ago
User avatar None

String added in the repository

  1. Klipper
  2. Config_Reference Glossary
  3. Spanish
[pwm_cycle_time]
 
3 weeks ago
User avatar None

String added in the repository

  1. Klipper
  2. Config_Reference Glossary
  3. Spanish
[pwm_tool my_tool]
pin:
# The pin to configure as an output. This parameter must be provided.
#maximum_mcu_duration:
# The maximum duration a non-shutdown value may be driven by the MCU
# without an acknowledge from the host.
# If host can not keep up with an update, the MCU will shutdown
# and set all pins to their respective shutdown values.
# Default: 0 (disabled)
# Usual values are around 5 seconds.
#value:
#shutdown_value:
#cycle_time: 0.100
#hardware_pwm: False
#scale:
# See the "output_pin" section for the definition of these parameters.
 
3 weeks ago
User avatar None

String added in the repository

  1. Klipper
  2. Config_Reference Glossary
  3. Spanish
Pulse width modulation digital output pins capable of high speed updates (one may define any number of sections with an "output_pin" prefix). Pins configured here will be setup as output pins and one may modify them at run-time using "SET_PIN PIN=my_pin VALUE=.1" type extended [g-code commands](G-Codes.md#output_pin).
 
3 weeks ago
User avatar None

String added in the repository

  1. Klipper
  2. Config_Reference Glossary
  3. Spanish
[pwm_tool]
 
3 weeks ago
User avatar None

String added in the repository

  1. Klipper
  2. Config_Reference Glossary
  3. Spanish
[output_pin my_pin]
pin:
# The pin to configure as an output. This parameter must be
# provided.
#pwm: False
# Set if the output pin should be capable of pulse-width-modulation.
# If this is true, the value fields should be between 0 and 1; if it
# is false the value fields should be either 0 or 1. The default is
# False.
#value:
# The value to initially set the pin to during MCU configuration.
# The default is 0 (for low voltage).
#shutdown_value:
# The value to set the pin to on an MCU shutdown event. The default
# is 0 (for low voltage).
#cycle_time: 0.100
# The amount of time (in seconds) per PWM cycle. It is recommended
# this be 10 milliseconds or greater when using software based PWM.
# The default is 0.100 seconds for pwm pins.
#hardware_pwm: False
# Enable this to use hardware PWM instead of software PWM. When
# using hardware PWM the actual cycle time is constrained by the
# implementation and may be significantly different than the
# requested cycle_time. The default is False.
#scale:
# This parameter can be used to alter how the 'value' and
# 'shutdown_value' parameters are interpreted for pwm pins. If
# provided, then the 'value' parameter should be between 0.0 and
# 'scale'. This may be useful when configuring a PWM pin that
# controls a stepper voltage reference. The 'scale' can be set to
# the equivalent stepper amperage if the PWM were fully enabled, and
# then the 'value' parameter can be specified using the desired
# amperage for the stepper. The default is to not scale the 'value'
# parameter.
#maximum_mcu_duration:
#static_value:
# These options are deprecated and should no longer be specified.
 
3 weeks ago
User avatar None

String added in the repository

  1. Klipper
  2. Config_Reference Glossary
  3. Spanish
[bed_mesh]
#speed: 50
# The speed (in mm/s) of non-probing moves during the calibration.
# The default is 50.
#horizontal_move_z: 5
# The height (in mm) that the head should be commanded to move to
# just prior to starting a probe operation. The default is 5.
#mesh_radius:
# Defines the radius of the mesh to probe for round beds. Note that
# the radius is relative to the coordinate specified by the
# mesh_origin option. This parameter must be provided for round beds
# and omitted for rectangular beds.
#mesh_origin:
# Defines the center X, Y coordinate of the mesh for round beds. This
# coordinate is relative to the probe's location. It may be useful
# to adjust the mesh_origin in an effort to maximize the size of the
# mesh radius. Default is 0, 0. This parameter must be omitted for
# rectangular beds.
#mesh_min:
# Defines the minimum X, Y coordinate of the mesh for rectangular
# beds. This coordinate is relative to the probe's location. This
# will be the first point probed, nearest to the origin. This
# parameter must be provided for rectangular beds.
#mesh_max:
# Defines the maximum X, Y coordinate of the mesh for rectangular
# beds. Adheres to the same principle as mesh_min, however this will
# be the furthest point probed from the bed's origin. This parameter
# must be provided for rectangular beds.
#probe_count: 3, 3
# For rectangular beds, this is a comma separate pair of integer
# values X, Y defining the number of points to probe along each
# axis. A single value is also valid, in which case that value will
# be applied to both axes. Default is 3, 3.
#round_probe_count: 5
# For round beds, this integer value defines the maximum number of
# points to probe along each axis. This value must be an odd number.
# Default is 5.
#fade_start: 1.0
# The gcode z position in which to start phasing out z-adjustment
# when fade is enabled. Default is 1.0.
#fade_end: 0.0
# The gcode z position in which phasing out completes. When set to a
# value below fade_start, fade is disabled. It should be noted that
# fade may add unwanted scaling along the z-axis of a print. If a
# user wishes to enable fade, a value of 10.0 is recommended.
# Default is 0.0, which disables fade.
#fade_target:
# The z position in which fade should converge. When this value is
# set to a non-zero value it must be within the range of z-values in
# the mesh. Users that wish to converge to the z homing position
# should set this to 0. Default is the average z value of the mesh.
#split_delta_z: .025
# The amount of Z difference (in mm) along a move that will trigger
# a split. Default is .025.
#move_check_distance: 5.0
# The distance (in mm) along a move to check for split_delta_z.
# This is also the minimum length that a move can be split. Default
# is 5.0.
#mesh_pps: 2, 2
# A comma separated pair of integers X, Y defining the number of
# points per segment to interpolate in the mesh along each axis. A
# "segment" can be defined as the space between each probed point.
# The user may enter a single value which will be applied to both
# axes. Default is 2, 2.
#algorithm: lagrange
# The interpolation algorithm to use. May be either "lagrange" or
# "bicubic". This option will not affect 3x3 grids, which are forced
# to use lagrange sampling. Default is lagrange.
#bicubic_tension: .2
# When using the bicubic algorithm the tension parameter above may
# be applied to change the amount of slope interpolated. Larger
# numbers will increase the amount of slope, which results in more
# curvature in the mesh. Default is .2.
#zero_reference_position:
# An optional X,Y coordinate that specifies the location on the bed
# where Z = 0. When this option is specified the mesh will be offset
# so that zero Z adjustment occurs at this location. The default is
# no zero reference.
#faulty_region_1_min:
#faulty_region_1_max:
# Optional points that define a faulty region. See docs/Bed_Mesh.md
# for details on faulty regions. Up to 99 faulty regions may be added.
# By default no faulty regions are set.
#adaptive_margin:
# An optional margin (in mm) to be added around the bed area used by
# the defined print objects when generating an adaptive mesh.
 
3 weeks ago
Browse all changes for this language