Trail Sense/Trail Sense User Guide — Chinese (Simplified Han script) @ Hosted Weblate

48	Strings	20%	Browse Translate
38,755	Words	4%
223,866	Characters	3%

Strings Words Characters
48 38,755 223,866	All strings	Browse Translate Zen
10 1,620 8,824	Translated strings	Browse Translate Zen
38 37,135 215,042	Unfinished strings	Browse Translate Zen
28 30,965 180,429	Untranslated strings	Browse Translate Zen
10 6,170 34,613	Strings marked for edit	Browse Translate Zen
38 37,135 215,042	Unfinished strings without suggestions	Browse Translate Zen
5 5,372 30,259	Strings with any failing checks	Browse Translate Zen
1 1,490 8,228	Translated strings with dismissed checks	Browse Translate Zen
5 5,372 30,259	Failing check: Mismatching line breaks	Browse Translate Zen
48 38,755 223,866	Strings without a label	Browse Translate Zen

Component	Translated	Unfinished	Unfinished words	Unfinished characters	Untranslated	Checks	Suggestions	Comments
Trail Sense Android MIT		0	0	0	0	0	0	0

Trail Sense Store Metadata MIT	37%	78	4,001	24,282	77	0	0	0

Project website	kylecorry.com/Trail-Sense
Instructions for translators	https://github.com/kylecorry31/Trail-Sense#contributing
Project maintainers	kylecorry31
Translation license	MIT License
Translation process	Translations can be made directly. Translation suggestions can be made. Any authenticated user can contribute. The translation uses monolingual files. The translation base language can not be edited.
Source code repository	`https://github.com/kylecorry31/Trail-Sense`
Repository branch	main
Last remote commit	Merge remote-tracking branch 'origin/main' `5561cd17b` kylecorry31 authored 16 hours ago
Last commit in Weblate	Translated using Weblate (Finnish) `d647475ba` tigg authored yesterday
Weblate repository	`https://hosted.weblate.org/git/trail-sense/trail-sense-android/`
File mask	`guides/*`
Monolingual base language file	`guides/en-US`
Translation file	Download `guides/zh-rCN`
Last change	Nov. 30, 2024, 8:47 p.m.
Last change made by	None
Language	Chinese (Simplified Han script)
Language code	zh_Hans
Text direction	Left to right
Number of speakers	1,286,095,292
Number of plurals	1
Plural type	None
Plurals
Plural formula	`0`

	Strings percent	Hosted strings	Words percent	Hosted words	Characters percent	Hosted characters
Total		48		38,755		223,866
Translated	20%	10	4%	1,620	3%	8,824
Needs editing	20%	10	15%	6,170	15%	34,613
Read-only	0%	0	0%	0	0%	0
Failing checks	10%	5	13%	5,372	13%	30,259
Strings with suggestions	0%	0	0%	0	0%	0
Untranslated strings	58%	28	79%	30,965	80%	180,429

None Resource updated Trail Sense Trail Sense User Guide Chinese (Simplified Han script)	The “`guides/en-US`” file was changed. 2 weeks ago
None String updated in the repository Trail Sense Trail Sense User Guide Chinese (Simplified Han script)	English The Augmented Reality tool lets you see beacons and the paths of the sun and moon overlaid onto the real world. ## Camera If you have camera permission granted, you will see a live camera feed in the background. If you do not have camera permission granted, you will see a black background instead. You can toggle the camera on and off by tapping the camera icon in the top-right corner of the screen. Additionally, while the camera is active, you can adjust the zoom level using two fingers to pinch or the slider at the bottom of the screen. ## Reticle A circular reticle is displayed in the center of your screen. You can use this to see more details about the marker you are looking at by centering it in the reticle. ## Beacons Nearby beacons are displayed as markers on the screen. You can tap on a beacon to start navigation (See the Navigation section below). The view distance can be adjusted in Settings > Augmented Reality > Beacons > "View distance". ## Paths Nearby paths are displayed below your feet. Due to GPS inaccuracy, the paths may not be perfectly aligned with the real world. The view distance can be adjusted in Settings > Augmented Reality > Paths > "View distance" You can choose to adjust paths using their recorded elevation by enabling Settings > Augmented Reality > "Use path elevation". This should make the paths line up better with hills and valleys, but is dependent on the accuracy of the elevation data. ## Sun / moon The paths that the sun and moon will take today are displayed as markers on the screen. The sun's path is displayed in yellow and the moon's path is displayed in white. A larger marker is displayed at the current time, and will also show the moon phase. Times in the past are lighter. If you bring the sun or moon into the reticle, you will see more details about the marker such as the time. If you tapped the "View in 3D" button on the Astronomy tool, you can use the guide to see where the sun or moon currently is and change the previewed date in the bottom panel. ## Stars The 50 brightest stars are shown at night. If you bring a star into the reticle, you will see its name. You can turn off the stars by disabling Settings > Augmented Reality > "Show stars". ## Grid / compass A grid is displayed on the screen to help orient you. The grid is aligned with the cardinal directions and is spaced at 30 degrees. The grid line for north is highlighted in orange. The cardinal directions are displayed over the grid. ## Orientation The orientation of your device is displayed at the top of the screen. This includes the compass bearing and the tilt angle. The Augmented Reality tool respects the true north setting found on Settings > Sensors > Compass > True north. ## Navigation Tap on a beacon to navigate to it. While navigating, you will see an arrow around the reticle pointing in the direction of the beacon. Move your phone toward the arrow to bring the beacon into view. When the beacon is in the reticle, the arrow will disappear. ## Calibration If the Augmented Reality tool is not aligned with the real world, you can calibrate it by tapping the compass icon in the top-left corner of the screen. This will prompt you to center either the sun or moon in the reticle and click "Calibrate". Always check the accuracy against the sun, moon, or known landmarks before using this tool. Depending on the quality of your phone's sensors, you may need to repeat calibration frequently. You will not be able to calibration on a moonless night. If your device has a gyroscope, calibrating will switch the tool to use the gyroscope for orientation. You can disable this in Settings > Augmented Reality > "Use gyroscope after calibration". To reset the calibration, long press the compass icon or close and reopen the tool. ### Accuracy The accuracy of the compass and GPS are shown in the bottom-left of the screen. You can tap the status icons to see more details about the accuracy and for further instructions on calibrating your compass. ## Sensors The Augmented Reality tool respects the compass source in Settings > Sensors > Compass > Source. If your device does not have a gyroscope, the tool will still work but will not be as accurate and may jitter. ## Layers You can toggle the visibility of the beacons, paths, astronomy, and grid layers by clicking the layer icon in the top-left corner of the screen or by changing the "Visible" setting in Settings > Augmented Reality. The preview date for the astronomy layer can be adjusted in the layers menu on the Augmented Reality tool. Chinese (Simplified Han script) 0 characters edited Current translation Empty 2 weeks ago
None Resource updated Trail Sense Trail Sense User Guide Chinese (Simplified Han script)	The “`guides/en-US`” file was changed. 2 weeks ago
None String updated in the repository Trail Sense Trail Sense User Guide Chinese (Simplified Han script)	English The Tides tool helps you keep track of tides at a specific location. ## Create a tide table Before venturing into coastal areas, consult an official tide table for accurate times and water heights. Once you have this information, follow these steps to import it into Trail Sense's Tide tool: 1. Click the tides button in the top-right corner of the screen. 2. Tap the '+' button in the bottom-right corner. 3. Optionally, provide a name and location for the tide. 4. Adjust the tide frequency, indicating how many high tides typically occur in a day (most places have 2, known as Semidiurnal). 5. Scroll down to the tide table section. 6. Click either 'H' for high tide or 'L' for low tide to toggle between them. 7. Select 'Time not set' and enter the date and time of the tide. 8. Optionally, click the '-' in the 'Height' column to input the tide's height. 9. To add another tide, tap the '+' button in the top-left corner of the table. 10. You can delete a tide by clicking the 'X' icon to the right of the tide. 11. The tide estimation method can be changed by clicking the 'Estimation method' dropdown. Lunitidal interval uses the moon's position to estimate tides, and may be more accurate in some locations. 12. Save the tide table by clicking the checkmark in the top-right corner. For the best accuracy, input all tides for each relevant day. Trail Sense will distinguish between entered and estimated tides on the tide chart. ### Estimation methods - Tide clock: Assumes a fixed tidal cycle and requires at least one known tide to operate. - Lunitidal interval: Uses the moon's position to estimate tides. - Auto: Requires at least one known tide, it will automatically calculate the lunitidal interval. - Local: Enter the lunitidal interval in hours and minutes for your location. This requires the location to be set, but does not require a tide table. - UTC/Greenwich: Enter the lunitidal interval in hours and minutes for UTC/Greenwich. This does not require a location or tide table. - Tide model (auto): Estimates the tide near the entered location or if no location is entered, near you. For most locations, tides should be accurate to within an hour. ## Viewing a tide table By default, the Tides tool displays the closest tide to your location when you open it. To change this, go to Settings > Tides > 'Show closest tide' to toggle between displaying the closest tide and the last tide you viewed. To select a different tide, click the tides button in the top-right corner of the screen. This opens a list of all the tide tables you've created. Simply click on a tide to view it. ### Nearby tide This shows the tide near your location using an offline tide modal. For most locations, tides should be accurate to within an hour, but always use official tide tables if possible. If you are not close to a tide you entered, this will be shown by default. This may be inaccurate in some areas, especially in areas with complicated geography. The nearby tide table can't be modified or deleted. ## Tide chart The tide chart displays the tides for the current day. The X-axis represents time, while the Y-axis represents the tide height. A dot marks the current time on the chart. By default, today is selected, but you can change it by tapping the calendar icon at the top of the screen. Additionally, you can use the arrows to move to the next/previous date or long press the calendar to quickly jump to today's date. At the top of the screen, you'll find the current tide level and, if available, the tide's height. A down arrow means a falling tide, while an up arrow means a rising tide. The bottom of the screen displays a tide table for the current day. If the tide height is entered, it will be shown here; otherwise, it will be estimated. Estimated tides may not be entirely accurate and are based on the inputted tides. ## Editing a tide table You can edit a tide table with the following steps: 1. Click the tides button in the top-right corner of the screen. 2. Click the menu button to the right of the tide you wish to edit. 3. Select 'Edit.' 4. You'll be taken to the same screen used to create the tide table. Edit the table as needed. 5. Save your changes by clicking the checkmark in the top-right corner. ## Deleting a tide table You can delete a tide table using the following steps: 1. Click the tides button in the top-right corner of the screen. 2. Click the menu button to the right of the tide you want to delete. 3. Choose 'Delete.' ## Viewing tides on the map By default, tides with a location entered will appear on the Navigation tool's radar compass and Photo Maps. To hide/show a tide, follow these steps: 1. Click the tides button in the top-right corner of the screen. 2. Click the menu button to the right of the tide you wish to hide or show. 3. Select 'Hide' or 'Show.' ## Estimating tides without a tide table If you don't have access to a tide table, you can estimate tides using the Tides tool. Keep in mind that this is just an estimate, so it's always best to consult an officially published tide table when possible. If you know whether the tide is currently high or low, you can create a tide table with a single entry (using the current time and tide level), and the Tides tool will estimate the tidal cycle. This should only be used for short-term predictions, as accuracy decreases further away from the reference tide. ## Finding official tide tables To locate an official tide table, search the Internet for tides at your location. Here are some community-recommended sites offering tide tables: ### Worldwide - [tides4fishing](https://tides4fishing.com/) - [tide-forecast.com](https://www.tide-forecast.com/) - [SHOM](https://maree.shom.fr/) ### Germany - [BSH](https://www.bsh.de/DE/DATEN/Vorhersagen/Gezeiten/gezeiten_node.html) ### Netherlands - [Rijkswaterstaat](https://www.rijkswaterstaat.nl/water/waterdata-en-waterberichtgeving/waterdata/getij) ### UK - [UK Hydrographic Office: EasyTide](https://easytide.admiralty.co.uk/) ### UK + Ireland - [NTSLF Tides](https://ntslf.org/tides/predictions) ### USA - [NOAA Tides & Currents](https://tidesandcurrents.noaa.gov/tide_predictions.html) - [Tides.net](https://tides.net/) ## Widgets The following widgets can be placed on your device's homescreen or viewed in-app: - Tides: Displays the status of the nearest tide. - Tide chart: The chart of water level of the nearest tide. ## Disclaimer Tide predictions are estimates and should not be relied upon exclusively. Whenever possible, use an official tide table and input the data into Trail Sense for accuracy. Chinese (Simplified Han script) 0 characters edited Current translation Empty 2 weeks ago
None Resource updated Trail Sense Trail Sense User Guide Chinese (Simplified Han script)	The “`guides/en-US`” file was changed. 2 weeks ago
None String updated in the repository Trail Sense Trail Sense User Guide Chinese (Simplified Han script)	English The Tides tool helps you keep track of tides at a specific location. ## Create a tide table Before venturing into coastal areas, consult an official tide table for accurate times and water heights. Once you have this information, follow these steps to import it into Trail Sense's Tide tool: 1. Click the tides button in the top-right corner of the screen. 2. Tap the '+' button in the bottom-right corner. 3. Optionally, provide a name and location for the tide. 4. Adjust the tide frequency, indicating how many high tides typically occur in a day (most places have 2, known as Semidiurnal). 5. Scroll down to the tide table section. 6. Click either 'H' for high tide or 'L' for low tide to toggle between them. 7. Select 'Time not set' and enter the date and time of the tide. 8. Optionally, click the '-' in the 'Height' column to input the tide's height. 9. To add another tide, tap the '+' button in the top-left corner of the table. 10. You can delete a tide by clicking the 'X' icon to the right of the tide. 11. The tide estimation method can be changed by clicking the 'Estimation method' dropdown. Lunitidal interval uses the moon's position to estimate tides, and may be more accurate in some locations. 12. Save the tide table by clicking the checkmark in the top-right corner. For the best accuracy, input all tides for each relevant day. Trail Sense will distinguish between entered and estimated tides on the tide chart. ### Estimation methods - Tide clock: Assumes a fixed tidal cycle and requires at least one known tide to operate. - Lunitidal interval: Uses the moon's position to estimate tides. - Auto: Requires at least one known tide, it will automatically calculate the lunitidal interval. - Local: Enter the lunitidal interval in hours and minutes for your location. This requires the location to be set, but does not require a tide table. - UTC/Greenwich: Enter the lunitidal interval in hours and minutes for UTC/Greenwich. This does not require a location or tide table. - Tide model (auto): [EXPERIMENTAL] Estimates the tide near the entered location or if no location is entered, near you. For most locations, tides should be accurate to within an hour. ## Viewing a tide table By default, the Tides tool displays the closest tide to your location when you open it. To change this, go to Settings > Tides > 'Show closest tide' to toggle between displaying the closest tide and the last tide you viewed. To select a different tide, click the tides button in the top-right corner of the screen. This opens a list of all the tide tables you've created. Simply click on a tide to view it. ### Nearby tide [EXPERIMENTAL] This shows the tide near your location using an offline tide modal. For most locations, tides should be accurate to within an hour, but always use official tide tables if possible. If you are not close to a tide you entered, this will be shown by default. This may be inaccurate in some areas, especially in areas with complicated geography. The nearby tide table can't be modified or deleted. ## Tide chart The tide chart displays the tides for the current day. The X-axis represents time, while the Y-axis represents the tide height. A dot marks the current time on the chart. By default, today is selected, but you can change it by tapping the calendar icon at the top of the screen. Additionally, you can use the arrows to move to the next/previous date or long press the calendar to quickly jump to today's date. At the top of the screen, you'll find the current tide level and, if available, the tide's height. A down arrow means a falling tide, while an up arrow means a rising tide. The bottom of the screen displays a tide table for the current day. If the tide height is entered, it will be shown here; otherwise, it will be estimated. Estimated tides may not be entirely accurate and are based on the inputted tides. ## Editing a tide table You can edit a tide table with the following steps: 1. Click the tides button in the top-right corner of the screen. 2. Click the menu button to the right of the tide you wish to edit. 3. Select 'Edit.' 4. You'll be taken to the same screen used to create the tide table. Edit the table as needed. 5. Save your changes by clicking the checkmark in the top-right corner. ## Deleting a tide table You can delete a tide table using the following steps: 1. Click the tides button in the top-right corner of the screen. 2. Click the menu button to the right of the tide you want to delete. 3. Choose 'Delete.' ## Viewing tides on the map By default, tides with a location entered will appear on the Navigation tool's radar compass and Photo Maps. To hide/show a tide, follow these steps: 1. Click the tides button in the top-right corner of the screen. 2. Click the menu button to the right of the tide you wish to hide or show. 3. Select 'Hide' or 'Show.' ## Estimating tides without a tide table If you don't have access to a tide table, you can estimate tides using the Tides tool. Keep in mind that this is just an estimate, so it's always best to consult an officially published tide table when possible. If you know whether the tide is currently high or low, you can create a tide table with a single entry (using the current time and tide level), and the Tides tool will estimate the tidal cycle. This should only be used for short-term predictions, as accuracy decreases further away from the reference tide. ## Finding official tide tables To locate an official tide table, search the Internet for tides at your location. Here are some community-recommended sites offering tide tables: ### Worldwide - [tides4fishing](https://tides4fishing.com/) - [tide-forecast.com](https://www.tide-forecast.com/) - [SHOM](https://maree.shom.fr/) ### Germany - [BSH](https://www.bsh.de/DE/DATEN/Vorhersagen/Gezeiten/gezeiten_node.html) ### Netherlands - [Rijkswaterstaat](https://www.rijkswaterstaat.nl/water/waterdata-en-waterberichtgeving/waterdata/getij) ### UK - [UK Hydrographic Office: EasyTide](https://easytide.admiralty.co.uk/) ### UK + Ireland - [NTSLF Tides](https://ntslf.org/tides/predictions) ### USA - [NOAA Tides & Currents](https://tidesandcurrents.noaa.gov/tide_predictions.html) - [Tides.net](https://tides.net/) ## Widgets The following widgets can be placed on your device's homescreen or viewed in-app: - Tides: Displays the status of the nearest tide. - Tide chart: The chart of water level of the nearest tide. ## Disclaimer Tide predictions are estimates and should not be relied upon exclusively. Whenever possible, use an official tide table and input the data into Trail Sense for accuracy. Chinese (Simplified Han script) 0 characters edited Current translation Empty 2 weeks ago
None Resource updated Trail Sense Trail Sense User Guide Chinese (Simplified Han script)	The “`guides/en-US`” file was changed. 2 weeks ago
None String updated in the repository Trail Sense Trail Sense User Guide Chinese (Simplified Han script)	English ## Units The units can be adjusted in Settings > Units. By default, the units are set based on your device's language settings. - Distance: The unit to display distance measurements. - Pressure: The unit to display barometric pressure measurements. - Temperature: The unit to display temperature measurements. - Weight: The unit to display weight measurements. - Coordinate format: The format to display geographic coordinates. - Location share map: The link to use when sharing a location. - Use 24-hour format: Whether to use a 24-hour clock. - Add leading zero to time: Whether to add a leading zero to the time (for example, 01:00 instead of 1:00). ## Sensors > Compass Compass settings can be found in Trail Sense Settings > Sensors > Compass. Some devices may not have a compass sensor, but you will still be able to set declination. ### Azimuth The current compass direction (azimuth) is displayed at the top of the compass settings. As you change settings, it will update to show the new direction. ### Calibrate The reported accuracy of the compass is shown. If it is low, you can click this option to view instructions on how to calibrate. ### Source - Magnetometer + Gyro: This is the default source and should work on most devices. It uses the magnetometer and gyroscope sensors to determine the direction. When the gyroscope is added in, the reading is typically less noisy. This source is provided by your phone's manufacturer. - Magnetometer: This source only uses the magnetometer sensor to determine the direction. This source is provided by your phone's manufacturer. - Magnetometer + Gyro (Custom): This source is similar to the Magnetometer + Gyro source, but the calculations are done by Trail Sense. If the Magnetometer + Gyro source is not working correctly, try this source. - Legacy (Trail Sense): This source is similar to the Magnetometer source, but the calculations are done by Trail Sense. If the Magnetometer source is not working correctly, try this source. - Legacy (Android): This source is provided by Android and is not recommended to use. It is only included for compatibility with older devices, but could potentially work well on some devices. ### Smoothing To reduce noise in compass readings, you can increase the smoothing setting. If using a source that has a gyroscope, a value of 1 is recommended. Otherwise, experiment with increasing this value until the compass appears to be working correctly when you rotate your phone. However, if you increase the smoothing too much, Trail Sense may ignore real compass changes. ### True north To display true north instead of magnetic north, enable the "True north" setting. This will adjust the compass reading to account for magnetic declination, and it will match most maps. ### Magnetic declination Magnetic declination is the difference between magnetic north and true north. You should ensure this is correct regardless of whether you are using true north or magnetic north. ### Auto adjust declination Enabling the "Auto adjust declination" setting will automatically adjust the declination based on your location. ### Declination override If you would prefer to manually set the declination, you can disable the "Auto adjust declination" setting and use the "Declination override" setting to set the declination. You can find the declination for your location on most maps or online. You can also click the "Set override from GPS" option to set the declination based on your current location (only sets it once). ## Sensors > GPS GPS settings can be found in Trail Sense Settings > Sensors > GPS. If your phone supports it, multiple GNSS systems will be used (such as GPS, GLONASS, Galileo, and BeiDou). ### Location Source You can choose to mock your location by disabling the "Auto adjust location" setting. This will enable the "Location override" setting where you can manually set your location. When "Auto adjust location" is enabled, the location will be determined by your device's GPS. ### Require satellite fix To get a more accurate location, Trail Sense requires at least 4 satellites to have a fix. If you are having trouble getting a location, you can disable this setting to allow for a location with fewer satellites (or if your phone does not support satellite counts). ### Cache Trail Sense automatically caches your last location to quickly load details in certain tools. You can clear this cache temporarily using the "Clear cache" option in the GPS settings. ## Sensors > Altimeter The altimeter is used to measure altitude. To adjust altimeter settings, go to Trail Sense Settings > Sensors > Altimeter. ### Elevation The current elevation is displayed at the top of the altimeter settings. As you change settings, it will update to show the new elevation. ### Source - GPS + Barometer: This is the default source and should work on most devices with a barometer. It combines the GPS and barometer to determine the altitude. - GPS: This source only uses the GPS to determine the altitude. It is less accurate than the GPS + Barometer source. - Barometer: This source only uses the barometer to determine the altitude. It is more accurate than the GPS source, but may drift over time and you will need to calibrate it before use. - Manual: This source allows you to manually set the altitude. This is useful if you know the altitude of your location and it will not change. ### GPS + Barometer settings - Force calibration interval: You can choose to force the altimeter to recalibrate using the GPS every so often. This is useful to compensate for drift in the barometer, which may be due to changes in weather or location. - Continuous calibration: You can choose to continuously calibrate the altimeter using the GPS. This is useful if you are moving around a lot and want the most accurate altitude reading. When this is enabled, it prefers the barometer reading, but will slightly adjust it based on the GPS reading. - Reset calibration: You can choose to reset the calibration of the altimeter. This is useful if you are in a new location and want to recalibrate the barometer. ### GPS settings - Samples: The number of GPS samples to use when determining the altitude. A higher number will give a more accurate reading, but will take longer to calculate. - NMEA elevation correction: The elevation provided by the GPS needs to be corrected to match the actual elevation. If this setting is enabled, it will use the correction factor provided by the GPS. If it is disabled, it will use the correction factor provided by Trail Sense, which may be more accurate. ### Barometer / manual settings - Elevation override: If you are using the barometer or manual source, you can set the elevation manually. This is useful if you know the elevation of your location. If using the barometer source, this setting is used to calibrate the barometer and will change as you move. - Set override from GPS: You can choose to set the elevation override using the GPS if you don't know your current elevation (only sets it once). - Set override from barometer: If you know the current sea level pressure for your location, you can set the elevation override using the barometer (only sets it once). Only available on devices with a barometer. ## Sensors > Barometer The barometer is used to measure air pressure. It can be used to predict the weather or determine your altitude. To adjust barometer settings, go to Trail Sense Settings > Sensors > Barometer. If you have the Weather Monitor (see the Weather tool) enabled, you will see a chart of the barometric pressure history as recorded by your device. The colored line represents the calibrated pressure while the gray line represents the raw pressure. When you adjust the settings, the chart will update to show the new calibrated pressure. The goal is to have the colored line smoothly follow the gray line. ### Sea level pressure Barometric pressure changes with altitude, which makes it difficult to compare pressure readings from different locations. To make pressure readings more consistent, enable the "Sea level pressure" setting. This will adjust the pressure reading to what it would be at sea level. Using this setting will increase the accuracy of weather predictions. ### Smoothing To reduce noise in pressure readings, increase the smoothing setting. A value of around 15% is recommended. However, if you increase the smoothing too much, Trail Sense may ignore real pressure changes. ### Factor in temperature To get a more accurate pressure reading, you can factor in the temperature. This will make the reading more prone to noise from your phone's thermometer, but it will also give you a more accurate reading of the actual air pressure. ### Barometer offset To calibrate the barometer, you can adjust the barometer offset. After tapping on the 'Barometer offset' setting, enter the current pressure as reported by a reliable source (must match your "sea level pressure" setting - most weather websites report sea level pressure). This will adjust the current pressure to match the reported pressure. Note, if you are using sea level pressure the calibration accuracy will vary with the GPS accuracy. You can click 'Reset calibration' to reset the calibration of the barometer. This will remove any offset that was previously set. ## Sensors > Thermometer Thermometer settings can be found in Trail Sense Settings > Sensors > Thermometer. ### Source On most phones, you should use the historic temperature source as it will be more accurate. - Historic temperature is estimated from 30 years of historical data. It's usually accurate, but not during extreme weather. You can calibrate it if it's wrong for your location. - Sensor temperature is read from the phone's built-in thermometer. It's often inaccurate because it's affected by the phone's CPU and battery. You can calibrate it to improve its accuracy. If you power off your phone for a while, you will get a more accurate reading from the sensor. ### Smoothing To reduce noise in temperature readings, you can increase the smoothing setting. If using the historic temperature source, this is normally not needed. If the Weather Monitor (see the Weather tool) is enabled, you will see a chart of the temperature history as recorded by your device. The colored line represents the calibrated temperature while the gray line represents the raw temperature. When you adjust the settings, the chart will update to show the new calibrated temperature. The goal is to have the colored line smoothly follow the gray line. #### Updating recorded temperatures If you change the temperature source to "Historic", you can choose to update all previously recorded temperatures. This will replace the old temperatures with the estimated temperature from the historic data. This is useful if you previously recorded temperatures with the sensor and then switched to historic temperatures. ### Calibrating 1. Reset the thermometer calibration in Trail Sense. 2. Put your phone in a cold place for 10 minutes. 3. Note the temperature shown in Trail Sense as the minimum phone temperature. 4. Note the actual temperature of the cold place using an actual thermometer. 5. Put your phone in a warm place for 10 minutes. 6. Note the temperature shown in Trail Sense as the maximum phone temperature. 7. Note the actual temperature of the warm place using an actual thermometer. 8. Go to the Thermometer sensor settings in Trail Sense and enter the minimum and maximum temperatures you recorded, along with the actual temperatures you recorded. Caution: Refer to your phone's manual to identify the designed operating temperatures, do not exceed these when performing calibration. ## Sensors > Camera Camera settings can be found in Trail Sense Settings > Sensors > Camera. ### Augmented reality projection The projection method determines how points get displayed onto the camera view. If you are experiencing issues with the points not aligning with the real world, try changing the projection method. - Estimated Intrinsics: This is the default method and should work on most devices. It uses the camera's properties to estimate the projection. - Manual Intrinsics: This is similar to the estimated intrinsics method, except that the calculations are done by the manufacturer. On some devices this does not work correctly. - Perspective: This is a simple projection method that factors in the distance of the point from the camera. It is similar to intrinsics, but may be less accurate in some cases. - Linear: This is the simplest projection method (also the fastest). It does not factor in distances. ## Sensors > Cell signal Cell signal settings can be found in Trail Sense Settings > Sensors > Cell signal. ### Refresh signal cache Your phone reports the current cell signal strength, but it may be outdated. You can choose to forcefully refresh the cell signal cache to get the current signal strength. This feature is only used by the Paths tool (Backtrack) when Settings > Paths > Record cell signal is enabled. ## Privacy Privacy settings can be adjusted in Settings > Privacy. - Location: Clicking this will take you to the GPS settings, where you can choose to use a mocked location. - Prevent screenshots: Prevents screenshots from being taken while the app is open. Note: Trail Sense does not use the Internet and all data is stored locally on your device. ## Errors Some tools such as Navigation and Astronomy display error banners at the top of the screen. These banners can be disabled in Settings > Errors. - Compass unavailable: The compass is not available on your device. - GPS unavailable: The GPS is not available on your device. - Location not set: The location is mocked but has not been set (uses 0, 0). - Compass accuracy: The compass accuracy is low. - GPS timeouts: The GPS has timed out and was unable to determine your location. ## Experimental Experimental features can be enabled in Settings > Experimental. These features are not ready for general use and may not work as expected. ## Backup / restore When switching to a new device or reinstalling the app, it may be helpful to backup your data and settings. This can be done in Settings > Backup / Restore. - Backup: Creates a backup of your data and settings. This will save as a zip file which is unencrypted and contains location data, so only send it to people you trust. - Restore: Restores a backup of your data and settings. This will permanently overwrite your current data and settings. You can restore from an older version of the app, but cannot restore from a newer version. - Automatic backup: Creates a backup of your data and settings every day in the folder of your choosing. It will only keep the last 2 backups. ## Tools Settings for each tool can be adjusted in the Settings > Tools section. For more information, see the guide for each tool. ## Theme Theme related settings can be adjusted in Settings > Theme. - Theme: The theme to use for the app. - Light: A theme with a white background. - Dark: A theme with a dark background. - Black: A theme with a black background. - System: A theme that follows the system settings. - System (black): A theme that follows the system settings with a black background when dark mode is enabled. - Sunrise/sunset: A theme that changes between light and dark based on the time of day. - Night: A theme with a black background and a red filter to help maintain night vision. - Dynamic colors: Whether to use your device's dynamic colors in the app, if disabled or unavailable colors in Trail Sense will be a shade of orange. - Compass dynamic colors: Whether to use your device's dynamic colors in the compass (cardinal directions and certain markers on maps). - Compact mode: Whether to use a more compact layout for the bottom bar (thinner and does not display labels). ## About You can find additional information about Trail Sense in Settings > About. - Version: The version of the app you are using. - Privacy policy: A link to the privacy policy. - Email developer: A link to send an email to the developer for feedback or support. - GitHub: A link to the GitHub repository (source code) for Trail Sense. - Licenses: A list of open source licenses used in Trail Sense. ## Quick action You can enable the Settings quick action in the settings for the tab where you want it to appear. To use the quick action, tap the quick action button and settings page for the active tool will be opened. Long press the quick action to open the app settings. Chinese (Simplified Han script) 0 characters edited Current translation Empty 2 weeks ago
None String updated in the repository Trail Sense Trail Sense User Guide Chinese (Simplified Han script)	English The Paths tool can be used to record waypoints while hiking or to follow a trail. ## Backtrack The Backtrack feature can be used to automatically record a path while you hike. To start Backtrack, click the start button in the bottom-right corner of the screen. A notification will appear showing how far you have traveled. You can stop Backtrack by clicking the stop button in the notification or by clicking the stop button in the bottom-right corner of the screen. To change the recording frequency, click the time under the Backtrack label at the bottom-left and enter a new interval. Backtrack can record the cell signal strength at each point. This can be enabled in Settings > Paths > 'Record cell signal'. If you also have Settings > Navigation > 'Last signal beacon' enabled, a beacon will be created for the last known location where you had a cell signal. By default, Backtrack paths are temporary and will be deleted after the number of days specified by Settings > Paths > 'Backtrack history'. You can choose to keep a Backtrack path forever by clicking the menu button on the Backtrack path row and selecting 'Keep forever'. ## Creating a path You can choose to manually create a path by doing the following: 1. Tap the '+' button in the bottom-right corner of the screen. 2. Click 'Path'. 3. Give the path a name and click 'OK'. 4. Click the '+ Point' button to add a point to the path at your current location. You can add as many points as you want. ## Importing paths If you have tracks or routes saved in a GPX file, you can import them into Trail Sense as paths. 1. Tap the '+' button in the bottom-right corner of the screen. 2. Click 'GPX File'. 3. Select the GPX file you want to load paths from. 4. Confirm that you want to import the paths by clicking 'OK'. You can uncheck any paths you don't want to import. 5. The paths will be created in the current group. ## Viewing a path To view a path, click the path in the list. This will open the path details page. The following information will be shown: - Name: The name of the path. - Group: The group the path is in. You can click the group name to move the path to a different group. - Map: A map showing the path and your current location. You can drag to move the map and pinch to zoom. You can also click a point on the map to select it. A scale is shown at the bottom-right of the map. You can make the map larger by clicking the expand button in the bottom-left corner of the map. - Selected point: The currently selected point on the map. It will show the time, cell signal strength, elevation, and slope of the point. You can click the menu button on the point to navigate to it, create a beacon for it, or delete it. Tap the selected point on the map to deselect it. - Duration: The time it took to record the path. - Distance: The distance of the path. - Points: The number of points in the path. - Difficulty: An estimate of the difficulty of the path. Calculated based on the distance, elevation change, and slope. - Ascent: The total elevation gain of the path. - Descent: The total elevation loss of the path. - Lowest point: The lowest elevation of the path. Click to select on the map. - Highest point: The highest elevation of the path. Click to select on the map. - Elevation chart: A chart showing the path's elevation over distance. Click a point on the chart to select it. - Points: To see the list of points in the path, click the menu button in the top-right and select 'Points'. Click a point to select it. Click the menu button on a point to navigate to it, create a beacon for it, or delete it. ## Path styles Adjust the path's appearance by opening it and selecting the line style or line color from the dropdowns at the top of the screen. Change the appearance of the path's points by selecting the point style from the dropdown on the top-right. Choose between the following point styles: - None: No points shown. - Cell signal: Show cell signal strength at each point. - Elevation: Show elevation at each point. - Time: Show the time each point was recorded. - Slope: Show the slope at each point. A key below the path map explains the colors. Set the default path styles in Settings > Paths > 'Default path style' for the line style and Settings > Navigation > 'Default path color' for the line color. ## Simplify a path Paths can be simplified to reduce the number of points in the path. This can be useful to improve the performance of the path rendering and may improve the accuracy of the path by removing GPS errors. To simplify a path, open the path and click the menu button in the top-right corner of the screen. Select 'Simplify path' and choose the desired simplification quality. High quality means fewer points will be removed, while low quality means more points will be removed. Once the path has been simplified, it is not possible to undo the simplification. You can choose to automatically simplify paths imported from a GPX file by enabling Settings > Paths > 'Simplify paths on import'. ## Navigate to a path You can navigate to the nearest point on a path by opening the path and clicking the 'Navigate' button at the bottom. This will open the navigation tool with the path as the destination. Alternatively, you can click the menu button on the path row you want to navigate to and then select 'Navigate'. By default, this will only navigate to recorded waypoints on the path. However, you can choose to navigate to any position on the path by disabling Settings > Paths > 'Only navigate to recorded points'. This will assume that the path is a straight line between points. Paths are also visible on the radar compass (see the 'Navigation' guide) and photo maps (see the 'Photo Maps' guide). ## Path visibility You can choose which paths are visible on the Navigation and Photo Maps tools by clicking the menu icon on the right side of the path row and selecting either Hide or Show. ## Delete a path To delete a path, click the menu button on the path row you want to remove, then select 'Delete'. ## Exporting paths To export paths, open the group you want to export and click the menu button in the top-right corner of the screen. Select 'Export', unselect any paths you don't want to export, then click 'OK'. The paths will be exported to a GPX file. Alternatively, you can export a single path by clicking the menu button on the path row you want to export, then selecting 'Export'. ## Organizing paths You can organize paths into groups. To create a group, click the '+' button in the bottom-right of the path list and select 'Group'. Give the group a name and click 'OK'. Click the group in the list to view the paths in that group. If you create a path or group while the group is open, the new path or group will be added to the currently open group. To change the group of an existing path, click the menu button on the path row you want to move, select 'Move to', and choose the target group. To rename a group, click the menu button on the group row you want to rename, then select 'Rename' and provide a new name. You can delete a group (along with all paths within it) by clicking the menu button on the group row you wish to remove, then selecting 'Delete'. ## Searching for paths To search through your created paths, use the search bar at the top of the path list. This search encompasses the current group and all subgroups. Additionally, you can sort paths by distance away, time, length or name by clicking the menu button in the top-right and selecting 'Sort'. ## Improving performance If you are experiencing performance issues with the Paths tool, you can enable Settings > Paths > 'Fast path rendering' which will render paths faster, at the cost of appearance. ## Quick action You can enable the Backtrack quick action in the settings for the desired tab. To use the quick action, tap the Backtrack quick action button to toggle it on or off. You can long press the button to open the Paths tool. ## Widgets The following widgets can be placed on your device's homescreen or viewed in-app: - Backtrack: Display the distance travelled if Backtrack is enabled. Chinese (Simplified Han script) 0 characters edited Current translation Needs editing “路径”工具可以在徒步旅行时用来记录路径点或追踪路径。 ## Backtrack Backtrack 功能可以用来在徒步旅行时自动记录路径，点击屏幕右下角的“开始”按钮启动此功能。屏幕上会出现一个通知，显示你已经走了多远。点击通知中的停止按钮或屏幕右下角的停止按钮，即可停止记录。要更改记录频率，请单击左下角 Backtrack 标签下的时间并输入新的间隔时间。 Backtrack 可以记录每个点的手机信号强度，可在“设置 > 路径 > 记录手机信号”中启用。如果还启用了“设置 > 导航 > 最后信号信标”，则会在最后一个有手机信号的已知位置处创建信标。默认情况下，Backtrack 路径是临时的，会在“设置 > 路径 > Backtrack 历史记录”指定的天数后删除。你可以选择永久保留路径，点击路径行上的菜单按钮并选择“永久保留”即可。 ## 创建路径可以选择通过以下方式手动创建路径： 1. 点击屏幕右下角的“+”按钮。 2. 点击“路径”。 3. 给路径命名，然后点击“确定”。 4. 单击“+ 点”按钮，向路径上添加当前位置对应点。点的数量不受限制。 ## 导入路径如果有保存在 GPX 文件中的轨迹或路线，可以将它们作为路径导入 Trail Sense。 1. 点击屏幕右下角的“+”按钮。 2. 点击“GPX 文件”。 3. 选择要加载路径的 GPX 文件。 4. 点击“确定”，确认要导入的路径。可以取消勾选不想导入的路径。 5. 路径将在当前分组中创建。 ## 查看路径点击列表中的路径可以进行查看。这将打开路径详情页面，显示以下信息： - 名称：路径的名称。 - 分组：路径所在分组，可以点击分组名称将其移动到其他分组。 - 地图：显示路径与当前位置的地图。可以拖动手指移动地图，捏合手指进行缩放。还可以点击地图上的某个点来选择该点。地图右下方显示比例尺。点击地图左下角的展开按钮可以放大地图。 - 选中点：地图上当前选中的点。会显示时间、手机信号强度、海拔与坡度。可以点击该点的菜单按钮导航到此处、为该点创建信标或将其删除。再点击一次可取消选中。 - 持续时间：记录路径所花时间。 - 距离：路径的距离。 - 点数：路径中点的总数目。 - 难度：对路径难度的估计。根据距离、海拔变化与坡度计算。 - 上行：路径一共升高的海拔高度。 - 下行：路径一共降低的海拔高度。 - 最低点：路径的海拔最低点。点击在地图上选择。 - 最高点：路径的海拔最高点。点击在地图上选择。 - 标高图：显示路径海拔高度随距离变化的图表。点击图表上的一个点即可将其选中。 - 点：要查看路径中的点列表，请单击右上角的菜单按钮并选择“点”。点击点可将其选中，单击点上的菜单按钮可导航到该点、为其创建信标或删除该点。 ## 路径样式打开路径后从屏幕顶部的下拉菜单中选择线条样式或线条颜色，即可调整路径的外观，选择点样式可以改变路径点的外观。可在以下点样式中进行选择： - 无：不显示点。 - 手机信号：显示各点的手机信号强度。 - 海拔：显示各点的海拔高度。 - 时间：显示各点的记录时间。 - 坡度：显示各点的坡度。路径图下方的关键字解释了这些颜色。在“设置 > 路径 > 默认路径样式”中可设置默认的路径线样式，在“设置 > 导航 > 默认路径颜色”中可设置颜色。 ## 简化路径路径可以简化以减少航点数。这有助于提高路径渲染的性能，并可通过消除 GPS 误差来提高路径的精确度。要简化路径，请打开路径，点击屏幕右上角的菜单按钮，选择“简化路径”并选择所需质量。质量高意味着删除的点数少，质量低意味着删除的点数多。一旦路径被简化，就无法撤销。可以选择自动简化从 GPX 文件导入的路径：启用“设置 > 路径 > 导入时简化路径”。 ## 导航到路径打开路径并点击底部的“导航”按钮，即可导航到路径上最近的点。这将打开以路径为目的地的导航工具。也可以单击要导航的路径行上的菜单按钮，然后选择“导航”。默认情况下，这只会导航到路径上记录的航点。不过也可以禁用“设置 > 路径 > 只导航到记录的点”，选择导航到路径上的任何位置。这将假定路径是点与点之间的直线。路径在雷达指南针（请参阅“导航”指南）和照片地图（请参阅“照片地图”指南）上也是可见的。 ## 路径可见性点击路径行右侧的菜单按钮并选择“隐藏”或“显示”，可选择“导航”与“照片地图”工具中可见的路径。 ## 删除路径要删除路径，请点击待删除的路径行的菜单按钮，然后选择“删除”。 ## 导出路径要导出路径，请打开待导出分组，点击右上角的菜单按钮，选择“导出”，取消勾选不想导出的路径，然后点击“确定”。所选路径将导出到 GPX 文件。如果要导出单个路径，也可以点击待导出的路径行的菜单按钮，然后选择“导出”。 ## 组织路径你可以将路径组织成组。要创建新分组，请点击路径列表右下方的“+”按钮并选择“分组”，为其命名，然后点击“确定”。点击列表中的分组即可将其打开。当有分组打开时，新建的路径与分组将被添加到此分组。要更改现有路径分组，请点击要移动的路径行的菜单按钮，选择“移动到”，然后选择目标分组。要重新命名分组，请点击要重新命名的路径行的菜单按钮，选择“重命名”并提供新名称。单击要删除的分组行的菜单按钮，然后选择“删除”，即可删除此分组（以及其中的所有路径）。 ## 搜索路径用路径列表顶部的搜索框搜索已创建的路径。该搜索包括当前分组和所有子分组。此外，还可以点击右上角的菜单按钮并选择“排序”，按距离、时间、长度或名称对路径进行排序。 ## 改善体验如果你在使用“路径”工具时遇到性能问题，可以启用“设置 > 路径 > 快速路径渲染”，以降低外观的代价加速渲染路径。 ## 快速操作你可以在设置中为希望使用 Backtrack 功能的标签页启用快速操作。要使用快速操作，点击 Backtrack 按钮切换其开关。可以长按按钮打开“路径”工具。 2 weeks ago
None Resource updated Trail Sense Trail Sense User Guide Chinese (Simplified Han script)	The “`guides/en-US`” file was changed. 2 weeks ago

Browse all translation changes


Dec	Jan	Feb	Mar	Apr	May	Jun	Jul	Aug	Sep	Oct	Nov

48	File in original format as translated in the repository	App store metadata files
48	All strings, converted files enriched with comments; suitable for offline translation	Android String Resource	CSV	JSON	JSON nested structure file	gettext PO	iOS strings	TBX	TMX	XLIFF 1.1 with gettext extensions	XLIFF 1.1	XLSX
38	Unfinished strings, converted files enriched with comments; suitable for offline translation	Android String Resource	CSV	JSON	JSON nested structure file	gettext PO	iOS strings	TBX	TMX	XLIFF 1.1 with gettext extensions	XLIFF 1.1	XLSX

Review strings changed by other users	`changed:>="1 month ago" AND NOT changed_by:anonymous`	Add
Translated strings	`state:>=translated`	Add
Strings with comments	`has:comment`	Add
Strings with any failing checks	`has:check`	Add
Strings with suggestions from others	`has:suggestion AND NOT suggestion_author:anonymous`	Add
Approved strings with suggestions	`state:approved AND has:suggestion`	Add
All untranslated strings added the past month	`added:>="1 month ago" AND state:<=needs-editing`	Add
Strings changed in the past two weeks	`changed:>="2 weeks ago"`	Add

Shortcut	Action
`?`	Open available keyboard shortcuts.
`Alt` + `Home`	Navigate to the first translation in the current search.
`Alt` + `End`	Navigate to the last translation in the current search.
`Alt` + `PageUp` or `Ctrl` + `↑` or `Alt` + `↑` or `Cmd` + `↑` or	Navigate to the last translation in the current search.
`Alt` + `PageDown` or `Ctrl` + `↓` or `Alt` + `↓` or `Cmd` + `↓` or	Navigate to the next translation in the current search.
`Ctrl` + `Enter` or `Cmd` + `Enter`	Submit current form; this works the same as pressing Save and continue while editing translation.
`Ctrl` + `Shift` + `Enter` or `Cmd` + `Shift` +`Enter`	Unmark translation as Needing edit and submit it.
`Alt` + `Enter` or `Option` + `Enter`	Submit the string as a suggestion; this works the same as pressing Suggest while editing translation.
`Ctrl` + `E` or `Cmd` + `E`	Focus on translation editor.
`Ctrl` + `U` or `Cmd` + `U`	Focus on comment editor.
`Ctrl` + `M` or `Cmd` + `M`	Shows Automatic suggestions tab.
`Ctrl` + `1` to `Ctrl` + `9` or `Cmd` + `1` to `Cmd` + `9`	Copies placeable of a given number from source string.
`Ctrl` + `M` followed by `1` to `9` or `Cmd` + `M` followed by `1` to `9`	Copy the machine translation of a given number to current translation.
`Ctrl` + `I` followed by `1` to `9` or `Cmd` + `I` followed by `1` to `9`	Ignore one item in the list of failing checks.
`Ctrl` + `J` or `Cmd` + `J`	Shows the Nearby strings tab.
`Ctrl` + `S` or `Cmd` + `S`	Focus on search field.
`Ctrl` + `O` or `Cmd` + `O`	Copy the source string.
`Ctrl` + `Y` or `Cmd` + `Y`	Toggle the Needs editing checkbox.
`→`	Browse the next translation string.
`←`	Browse the previous translation string.

Trail Sense

Trail Sense User Guide

Chinese (Simplified Han script)

Translation status

Strings status

Other components

Overview

String statistics

Activity in last 12 months

Quick numbers

Trends of last 30 days

Quick downloads

Customize download

Search