Klipper

Installation

French

Translate

Zen

Translation

English

French

Needs editing

Sign in to save the translation.

Skip

	English	French	Actions
	make	make
	ls /dev/serial/by-id/*	ls /dev/serial/by-id/*
	/dev/serial/by-id/usb-1a86_USB2.0-Serial-if00-port0	/dev/serial/by-id/usb-1a86_USB2.0-Serial-if00-port0
	sudo service klipper stop make flash FLASH_DEVICE=/dev/serial/by-id/usb-1a86_USB2.0-Serial-if00-port0 sudo service klipper start	sudo service klipper stop make flash FLASH_DEVICE=/dev/serial/by-id/usb-1a86_USB2.0-Serial-if00-port0 sudo service klipper start
	cp ~/klipper/config/example-cartesian.cfg ~/printer.cfg nano ~/printer.cfg	cp ~/klipper/config/example-cartesian.cfg ~/printer.cfg nano ~/printer.cfg
	[mcu] serial: /dev/serial/by-id/usb-1a86_USB2.0-Serial-if00-port0	[mcu] serial: /dev/serial/by-id/usb-1a86_USB2.0-Serial-if00-port0
	Installation	Installation
	git clone https://github.com/Klipper3d/klipper ./klipper/scripts/install-octopi.sh	git clone https://github.com/Klipper3d/klipper ./klipper/scripts/install-octopi.sh
	Start by installing [OctoPi](https://github.com/guysoft/OctoPi) on the Raspberry Pi computer. Use OctoPi v0.17.0 or later - see the [OctoPi releases](https://github.com/guysoft/OctoPi/releases) for release information. One should verify that OctoPi boots and that the OctoPrint web server works. After connecting to the OctoPrint web page, follow the prompt to upgrade OctoPrint to v1.4.2 or later.	Commencez par installer [OctoPi](https://github.com/guysoft/OctoPi) sur l'ordinateur Raspberry Pi. Utilisez OctoPi v0.17.0 ou plus récent - voir les [OctoPi releases](https://github.com/guysoft/OctoPi/releases) pour les informations de versions. Il faut vérifier que OctoPi démarre et que le serveur web OctoPrint fonctionne. Après s'être connecté à la page web d'OctoPrint, suivez les instructions pour mettre à jour OctoPrint à la version v1.4.2 ou ultérieure.
	Obtain a Klipper Configuration File	Obtenir un fichier de configuration de Klipper
	Most Klipper settings are determined by a "printer configuration file" that will be stored on the Raspberry Pi. An appropriate configuration file can often be found by looking in the Klipper [config directory](../config/) for a file starting with a "printer-" prefix that corresponds to the target printer. The Klipper configuration file contains technical information about the printer that will be needed during the installation.	La plupart des paramètres de Klipper sont déterminés par un "fichier de configuration d'imprimante" stocké sur le Raspberry Pi. Un fichier de configuration approprié peut souvent être trouvé en recherchant dans le [répertoire des configurations](../config/) de Klipper, un fichier commençant par un préfixe "printer-" correspondant à l'imprimante cible. Le fichier de configuration de Klipper contient des informations techniques sur l'imprimante nécessaires pendant l'installation.

Loading…

fran6p

Translation changed

English

French 0 characters edited Current translation

2 years ago

Tircown

Marked for edit

English

French 66 characters edited Current translation

2 years ago

Browse all string changes

Things to check

Punctuation spacing

Missing non breakable space before double punctuation sign

Glossary

English	French
[mcu]	[mcu\|	Config_Reference
MCU	微控制器	Klipper

String information

Screenshot context

Screenshot 2021-06-21 at 11-44-39 KevinOConnor klipper-translations

Flags

ignore-same, md-text

String age

2 years ago

Last updated

12 months ago

Source string age

2 years ago

Translation file

docs/locales/fr/LC_MESSAGES/Installation.po, string 27