Zen

Translation

Most common boards should be available, however it is possible to add a new board definition if necessary. Board definitions are located in `~/klipper/scripts/spi_flash/board_defs.py`. The definitions are stored in dictionary, for example:
227/2390 · 239

Sign in to save the translation.

English Slovak Actions
Note that when upgrading a MKS Robin E3 it is not necessary to manually run `update_mks_robin.py` and supply the resulting binary to `flash-sdcard.sh`. This procedure is automated during the upload process.
Upozorňujeme, že pri aktualizácii MKS Robin E3 nie je potrebné manuálne spúšťať `update_mks_robin.py` a dodávať výsledný binárny súbor do `flash-sdcard.sh`. Tento postup je automatizovaný počas procesu nahrávania.
Caveats
Výstrahy
As mentioned in the introduction, this method only works for upgrading firmware. The initial flashing procedure must be done manually per the instructions that apply to your controller board.
Ako už bolo spomenuté v úvode, tento spôsob funguje len pri aktualizácii firmvéru. Počiatočný postup blikania sa musí vykonať manuálne podľa pokynov, ktoré sa vzťahujú na vašu riadiacu dosku.
While it is possible to flash a build that changes the Serial Baud or connection interface (ie: from USB to UART), verification will always fail as the script will be unable to reconnect to the MCU to verify the current version.
Aj keď je možné flashovať zostavu, ktorá mení sériový Baud alebo rozhranie pripojenia (tj: z USB na UART), overenie vždy zlyhá, pretože skript sa nebude môcť znova pripojiť k MCU, aby overil aktuálnu verziu.
Board Definitions
Definície dosky
Most common boards should be available, however it is possible to add a new board definition if necessary. Board definitions are located in `~/klipper/scripts/spi_flash/board_defs.py`. The definitions are stored in dictionary, for example:
Väčšina bežných dosiek by mala byť k dispozícii, v prípade potreby je však možné pridať novú definíciu dosky. Definície dosiek sa nachádzajú v ` ~/klipper/scripts/spi_flash/board_defs.py`. Definície sú uložené v slovníku, napr.
The following fields may be specified:
Môžu byť špecifikované nasledujúce polia:
`firmware_path`: The path on the SD Card where firmware should be transferred. The default is `firmware.bin`.
`firmware_path`: Cesta na SD karte, kam sa má preniesť firmvér. Predvolená hodnota je `firmware.bin`.
`spi_pins`: This should be 3 comma separated pins that are connected to the SD Card in the format of `miso,mosi,sclk`.
`spi_pins`: Mali by to byť 3 kolíky oddelené čiarkou, ktoré sú pripojené ku karte SD vo formáte `miso,mosi,sclk`.
Prior to creating a new board definition one should check to see if an existing board definition meets the criteria necessary for the new board. If this is the case, a `BOARD_ALIAS` may be specified. For example, the following alias may be added to specify `my-new-board` as an alias for `generic-lpc1768`:
Pred vytvorením novej definície dosky by ste mali skontrolovať, či existujúca definícia dosky spĺňa kritériá potrebné pre novú dosku. Ak ide o tento prípad, možno zadať `BOARD_ALIAS` Napríklad je možné pridať nasledujúci alias na špecifikáciu `my-new-board` ako alias pre „generic-lpc1768`:
If you need a new board definition and you are uncomfortable with the procedure outlined above it is recommended that you request one in the [Klipper Community Discord](Contact.md#discord).
Ak potrebujete novú definíciu dosky a nie je vám vyhovujúci postup načrtnutý vyššie, odporúča sa, aby ste si ju vyžiadali v [Klipper Community Discord](Contact.md#discord).

Loading…

User avatar Spravko

Translation changed

  1. Klipper
  2. SDCard_Updates
  3. Slovak
Most common boards should be available, however it is possible to add a new board definition if necessary. Board definitions are located in `~/klipper/scripts/spi_flash/board_defs.py`. The definitions are stored in dictionary, for example:
Väčšina bežných dosiek by mala byť k dispozícii, v prípade potreby je však možné pridať novú definíciu dosky. Definície dosiek sa nachádzajú v ` ~/klipper/scripts/spi_flash/board_defs.py`. Definície sú uložené v slovníku, napr.
5 months ago
User avatar Spravko

Translation added

  1. Klipper
  2. SDCard_Updates
  3. Slovak
Most common boards should be available, however it is possible to add a new board definition if necessary. Board definitions are located in `~/klipper/scripts/spi_flash/board_defs.py`. The definitions are stored in dictionary, for example:
Väčšina bežných dosiek by mala byť k dispozícii, v prípade potreby je však možné pridať novú definíciu dosky. Definície dosiek sa nachádzajú v `~/klipper/scripts/spi_flash/board_defs.py`. Definície sú uložené v slovníku, napr.
5 months ago
User avatar None

String updated in the repository

  1. Klipper
  2. SDCard_Updates
  3. Slovak
Most common boards should be available, however it is possible to add a new board definition if necessary. Board definitions are located in `~/klipper/scripts/spi_flash/board_defs.py`. The definitions are stored in dictionary, for example:
 
5 months ago
Browse all string changes

Things to check

Mismatched colon

Source and translation do not both end with a colon

Reset

Mismatched full stop

Source and translation do not both end with a full stop

Reset

Glossary

English Slovak
Klipper Klipper Klipper

String information

Screenshot context
Screenshot 2021-06-21 at 20-26-48 KevinOConnor klipper-translations
Flags
md-text
String age
5 months ago
Last updated
5 months ago
Source string age
2 years ago
Translation file
docs/locales/sk/LC_MESSAGES/SDCard_Updates.po, string 16