Klipper/MCU_Commands @ Hosted Weblate

Language	Approved	Translated	Unfinished	Unfinished words	Unfinished characters	Untranslated	Checks	Suggestions	Comments
English GPL-3.0			0	0	0	0	2	0	0

Abkhazian GPL-3.0	0%	0%	44	2,292	14,989	44	0	0	0

Albanian GPL-3.0	0%	0%	44	2,292	14,989	44	0	0	0

Angika GPL-3.0	0%	0%	44	2,292	14,989	44	0	0	0

Arabic GPL-3.0	0%	0%	44	2,292	14,989	44	0	0	0

Bulgarian GPL-3.0	0%	6%	41	2,232	14,563	41	0	0	0

Catalan GPL-3.0	0%	0%	44	2,292	14,989	44	0	0	0

Chinese (Simplified Han script) GPL-3.0	0%		0	0	0	0	0	0	0

Chinese (Traditional Han script) GPL-3.0	0%		0	0	0	0	0	0	0

Chuukese GPL-3.0	0%	0%	44	2,292	14,989	44	0	0	0

Czech GPL-3.0	0%	9%	40	2,230	14,547	40	0	0	0

Danish GPL-3.0	0%	2%	43	2,290	14,977	43	0	0	0

Duala GPL-3.0	0%	0%	44	2,292	14,989	44	0	0	0

Dutch GPL-3.0	0%	2%	43	2,290	14,977	43	0	0	0

Esperanto GPL-3.0	0%	0%	44	2,292	14,989	44	0	0	0

French GPL-3.0	0%		0	0	0	0	0	0	0

German GPL-3.0	0%	22%	34	2,215	14,409	34	0	1	0

Hungarian GPL-3.0	0%		0	0	0	0	0	0	0

Italian GPL-3.0	0%		0	0	0	0	0	0	0

Japanese GPL-3.0	0%	2%	43	2,290	14,977	43	0	0	0

Korean GPL-3.0	0%	97%	1	90	671	1	0	0	0

Lithuanian GPL-3.0	0%	0%	44	2,292	14,989	44	0	0	0

Norwegian Bokmål GPL-3.0	0%	0%	44	2,292	14,989	44	0	0	0

Polish GPL-3.0	0%	11%	39	2,127	13,882	39	0	0	0

Portuguese GPL-3.0	0%	2%	43	2,290	14,977	43	0	0	0

Portuguese (Brazil) GPL-3.0	0%	4%	42	2,246	14,674	42	0	0	0

Romanian GPL-3.0	0%	0%	44	2,292	14,989	44	0	0	0

Russian GPL-3.0	0%	97%	1	2	10	0	0	0	0

Slovak GPL-3.0	0%	0%	44	2,292	14,989	44	0	0	0

Slovenian GPL-3.0	0%	0%	44	2,292	14,989	44	0	0	0

Spanish GPL-3.0	0%	2%	43	2,290	14,977	42	1	0	0

Thai GPL-3.0	0%	0%	44	2,292	14,989	44	0	0	0

Turkish GPL-3.0	0%	6%	41	2,232	14,563	41	0	0	0

Ukrainian GPL-3.0	0%		0	0	0	0	0	0	0

Vietnamese GPL-3.0	0%	0%	44	2,292	14,989	44	0	0	0

Please sign in to see the alerts.

Overview

Project website	www.klipper3d.org
Instructions for translators	The code blocks are included in the Gettext files in case if some comments need to be translated. You can add comments as well. For code blocks without comment, please flag them as `ignore-same`, if you don't the permission, comment in a GitHub PR to let me know. For links that refer to a title inside an md file, please add a Link Modification Req tag. The Gettext and markdown files in docs/locales are specific for languages. Check contributing for current guidelines. To merge a translation into the main Klipper repository, certain requirements have to be met. We are still determining the requirements and no merging is planned. - Yifei Ding
Project maintainers	kingu dingyifei KevinOConnor Neko-vecter
Translation license	GNU General Public License v3.0 or later
Translation process	Translations can be made directly. Translation suggestions can be made. Translations are reviewed by dedicated reviewers. Any authenticated user can contribute. The translation uses bilingual files.
Source code repository	`https://github.com/Klipper3d/klipper-translations/`
Repository branch	translations
Last remote commit	locales: Automated Markdown Update `d8e5a7fd8` GitHub authored 11 days ago
Last commit in Weblate	locales: Translated using Weblate (Bulgarian) `b1b011e2b` nikdan authored 18 hours ago
Weblate repository	`https://hosted.weblate.org/git/klipper/readme/`
File mask	`docs/locales/*/LC_MESSAGES/MCU_Commands.po`

8 days ago

String statistics

	Strings percent	Hosted strings	Words percent	Hosted words	Characters percent	Hosted characters
Total		1,540		80,220		524,615
Source		44		2,292		14,989
Approved	0%	0	0%	0	0%	0
Waiting for review	24%	382	23%	18,724	23%	122,587
Translated	27%	426	26%	21,016	26%	137,576
Needs editing	1%	2	1%	46	1%	313
Read-only	2%	44	2%	2,292	2%	14,989
Failing checks	1%	3	1%	262	1%	1,667
Strings with suggestions	1%	1	1%	103	1%	665
Untranslated strings	72%	1,112	73%	59,158	73%	386,726

Last 12 months Previous

Activity in last 12 months


Nov	Dec	Jan	Feb	Mar	Apr	May	Jun	Jul	Aug	Sep	Oct

Quick numbers

80,220

Hosted words

1,540

Hosted strings

27%

Translated

Contributors

and previous 30 days

Trends of last 30 days

+2%

Hosted words

+100%

+2%

Hosted strings

+100%

+2%

Translated

+25%

+50%

Contributors

+100%

Search

Advanced query builder

Query examples

Review strings changed by other users	`changed:>="1 month ago" AND NOT changed_by:anonymous`	Add
Translated strings	`state:>=translated`	Add
Strings with comments	`has:comment`	Add
Strings with any failing checks	`has:check`	Add
Strings with suggestions from others	`has:suggestion AND NOT suggestion_author:anonymous`	Add
Approved strings with suggestions	`state:approved AND has:suggestion`	Add
All untranslated strings added the past month	`added:>="1 month ago" AND state:<=needs-editing`	Add
Strings changed in the past two weeks	`changed:>="2 weeks ago"`	Add
Translated strings in a certain language	`is:translated AND language:en`	Add

None Alert triggered Klipper MCU_Commands	Repository has changes. 21 hours ago
None Changes committed Klipper MCU_Commands Ukrainian	Changes committed 11 days ago
mgorpinic2005 Translation completed Klipper MCU_Commands Ukrainian	Translation completed 11 days ago
mgorpinic2005 Translation added Klipper MCU_Commands Ukrainian	English `config_stepper oid=%c step_pin=%c dir_pin=%c invert_step=%c step_pulse_ticks=%u` : This command creates an internal stepper object. The 'step_pin' and 'dir_pin' parameters specify the step and direction pins respectively; this command will configure them in digital output mode. The 'invert_step' parameter specifies whether a step occurs on a rising edge (invert_step=0) or falling edge (invert_step=1). The 'step_pulse_ticks' parameter specifies the minimum duration of the step pulse. If the mcu exports the constant 'STEPPER_BOTH_EDGE=1' then setting step_pulse_ticks=0 and invert_step=-1 will setup for stepping on both the rising and falling edges of the step pin. Ukrainian 633 characters edited Current translation Translated `config_stepper oid=%c Крок_pin=%c dir_pin=%c invert_step=%c step_pulse_ticks=%u` : Ця команда створює об'єкт внутрішнього кроку. Параметри 'step_pin' і 'dir_pin' вкажіть крок і напрямні шпильки відповідно; ця команда налаштує їх в режимі цифрового виведення. параметр 'invert_step' визначає, чи відбувається крок на висхідному краю (invert_step=0) або падіння краю (invert_step=1). параметр 'step_pulse_ticks' визначає мінімальну тривалість імпульсу кроку. Якщо мку вивозить постійний 'STEPPER_BOTH_EDGE=1' потім встановивши крок_пульс_ticks=0 і invert_step=-1 буде налаштовуватися як на вирості, так і знизу країв крокової шпильки. 11 days ago
mgorpinic2005 Translation changed Klipper MCU_Commands Ukrainian	English MCU commands Ukrainian 15 characters edited Current translation Translated Команди ~~мікроконтролера~~МКУ 11 days ago
mgorpinic2005 Translation added Klipper MCU_Commands Ukrainian	English `spi_send oid=%c data=%s` : This command is similar to "spi_transfer", but it does not generate a "spi_transfer_response" message. Ukrainian 122 characters edited Current translation Translated `spi_send oid=%c data=%s` : Ця команда схожа на "spi_transfer", але вона не генерує повідомлення "spi_transfer_response". 11 days ago
mgorpinic2005 Translation added Klipper MCU_Commands Ukrainian	English `spi_transfer oid=%c data=%s` : This command causes the micro-controller to send 'data' to the spi device specified by 'oid' and it generates a "spi_transfer_response" response message with the data returned during the transmission. Ukrainian 221 characters edited Current translation Translated `spi_transfer oid=%c data=%s` : Ця команда викликає мікроконтролер для надсилання "даних" до пристрою спі, зазначеного "недійсним" і генерує повідомлення "spi_transfer_response" з даними, що повернулися під час передачі. 11 days ago
mgorpinic2005 Translation added Klipper MCU_Commands Ukrainian	English SPI Commands Ukrainian 11 characters edited Current translation Translated Команди SPI 11 days ago
mgorpinic2005 Translation added Klipper MCU_Commands Ukrainian	English It is the responsibility of the host to ensure that there is available space in the queue before sending a queue_step command. The host does this by calculating when each queue_step command completes and scheduling new queue_step commands accordingly. Ukrainian 224 characters edited Current translation Translated Це відповідальність хосту, щоб забезпечити, що є доступним простір в черзі перед відправкою команди. Ведуться це шляхом обчислення, коли кожна черга_покрокова команда завершує і scheduling нових команд чергування відповідно. 11 days ago
mgorpinic2005 Translation added Klipper MCU_Commands Ukrainian	English Each queue_step command utilizes an entry in the micro-controller "move queue". This queue is allocated when it receives the "finalize_config" command, and it reports the number of available queue entries in "config" response messages. Ukrainian 245 characters edited Current translation Translated Кожна черга_покрокова команда використовує запис в мікроконтролері "переміщення черг". Ця черга виділяється, коли вона отримує команду "finalize_config", і вона повідомляє про кількість доступних записів черги в повідомленнях "config" відповідь. 11 days ago

Browse all component changes

Shortcut	Action
`?`	Open available keyboard shortcuts.
`Alt` + `Home`	Navigate to the first translation in the current search.
`Alt` + `End`	Navigate to the last translation in the current search.
`Alt` + `PageUp` or `Ctrl` + `↑` or `Alt` + `↑` or `Cmd` + `↑` or	Navigate to the last translation in the current search.
`Alt` + `PageDown` or `Ctrl` + `↓` or `Alt` + `↓` or `Cmd` + `↓` or	Navigate to the next translation in the current search.
`Ctrl` + `Enter` or `Cmd` + `Enter`	Submit current form; this works the same as pressing Save and continue while editing translation.
`Ctrl` + `Shift` + `Enter` or `Cmd` + `Shift` +`Enter`	Unmark translation as Needing edit and submit it.
`Alt` + `Enter` or `Option` + `Enter`	Submit the string as a suggestion; this works the same as pressing Suggest while editing translation.
`Ctrl` + `E` or `Cmd` + `E`	Focus on translation editor.
`Ctrl` + `U` or `Cmd` + `U`	Focus on comment editor.
`Ctrl` + `M` or `Cmd` + `M`	Shows Automatic suggestions tab.
`Ctrl` + `1` to `Ctrl` + `9` or `Cmd` + `1` to `Cmd` + `9`	Copies placeable of a given number from source string.
`Ctrl` + `M` followed by `1` to `9` or `Cmd` + `M` followed by `1` to `9`	Copy the machine translation of a given number to current translation.
`Ctrl` + `I` followed by `1` to `9` or `Cmd` + `I` followed by `1` to `9`	Ignore one item in the list of failing checks.
`Ctrl` + `J` or `Cmd` + `J`	Shows the Nearby strings tab.
`Ctrl` + `S` or `Cmd` + `S`	Focus on search field.
`Ctrl` + `O` or `Cmd` + `O`	Copy the source string.
`Ctrl` + `Y` or `Cmd` + `Y`	Toggle the Needs editing checkbox.
`→`	Browse the next translation string.
`←`	Browse the previous translation string.