Klipper/CANBUS — Czech @ Hosted Weblate: USB to CAN bus bridge mode

Translation

English

Czech

Needs editing

Skip

	English	Czech	Actions
	Update the Klipper [mcu configuration](Config_Reference.md#mcu) to use the CAN bus to communicate with the device - for example:
	~/klippy-env/bin/python ~/klipper/scripts/canbus_query.py can0	~/klippy-env/bin/python ~/klipper/scripts/canbus_query.py can0
	[mcu my_can_mcu] canbus_uuid: 11aa22bb33cc	[mcu my_can_mcu] canbus_uuid: 11aa22bb33cc
	CANBUS	CANBUS
	To compile for CAN, run `make menuconfig` and select "CAN bus" as the communication interface. Finally, compile the micro-controller code and flash it to the target board.
	USB to CAN bus bridge mode	USB to CAN bus bridge mode
	Some important notes when using this mode:
	It is necessary to configure the `can0` (or similar) interface in Linux in order to communicate with the bus. However, Linux CAN bus speed and CAN bus bit-timing options are ignored by Klipper. Currently, the CAN bus frequency is specified during "make menuconfig" and the bus speed specified in Linux is ignored.
	Found canbus_uuid=11aa22bb33cc, Application: Klipper
	Klipper currently supports CAN on stm32, SAME5x, and rp2040 chips. In addition, the micro-controller chip must be on a board that has a CAN transceiver.
	In order to use a CAN bus, it is necessary to have a host adapter. It is recommended to use a "USB to CAN adapter". There are many different USB to CAN adapters available from different manufacturers. When choosing one, we recommend verifying that the firmware can be updated on it. (Unfortunately, we've found some USB adapters run defective firmware and are locked down, so verify before purchasing.) Look for adapters that can run Klipper directly (in its "USB to CAN bridge mode") or that run the [candlelight firmware](https://github.com/candle-usb/candleLight_fw).

Loading…

MickCZ

Marked for edit

English

Czech 26 characters edited Current translation Needs editing

a month ago

None

String updated in the repository

English

Czech 0 characters edited Empty

a year ago

Browse all string changes

Things to check

Unchanged translation

Source and translation are identical

Reset

Glossary

English	Czech
No related strings found in the glossary.

String information

Flags

md-text

Source string location

docs/CANBUS.md:block • 26 • (header)

String age

a year ago

Last updated

a month ago

Source string age

a year ago

Translation file

docs/locales/cs/LC_MESSAGES/CANBUS.po, string 19