Klipper

Axis_Twist_Compensation

German

Translate

Zen

Translation

English

German

Needs editing

Sign in to save the translation.

Skip

	English	German	Actions
	Overview of compensation usage
	Tip: Make sure the [probe X and Y offsets](Config_Reference.md#probe) are correctly set as they greatly influence calibration.
	After setting up the [axis_twist_compensation] module, perform `AXIS_TWIST_COMPENSATION_CALIBRATE`
	The calibration wizard will prompt you to measure the probe Z offset at a few points along the bed
	The calibration defaults to 3 points but you can use the option `SAMPLE_COUNT=` to use a different number.
	[Adjust your Z offset](Probe_Calibrate.md#calibrating-probe-z-offset)	[Adjust your Z offset](Probe_Calibrate.md#calibrating-probe-z-offset)
	Perform automatic/probe-based bed tramming operations, such as [Screws Tilt Adjust](G-Codes.md#screws_tilt_adjust), [Z Tilt Adjust](G-Codes.md#z_tilt_adjust) etc
	Home all axis, then perform a [Bed Mesh](Bed_Mesh.md) if required
	Perform a test print, followed by any [fine-tuning](Axis_Twist_Compensation.md#fine-tuning) as desired
	Tip: Bed temperature and nozzle temperature and size do not seem to have an influence to the calibration process.
	[axis_twist_compensation] setup and commands	[axis_twist_compensation] Einrichtung und Befehle

Loading…

NikTec

Translation added

English

German 69 characters edited Current translation Translated

a month ago

None

String updated in the repository

English

German 0 characters edited Empty

7 months ago

Browse all string changes

Things to check

Unchanged translation

Source and translation are identical

Glossary

English	German
PROBE	PROBE	G-Codes
PROBE_CALIBRATE	PROBE_CALIBRATE	G-Codes

String information

Flags

md-text

Source string location

docs/Axis_Twist_Compensation.md:block • 10 • (ordered • list)

String age

7 months ago

Last updated

7 months ago

Source string age

7 months ago

Translation file

docs/locales/de/LC_MESSAGES/Axis_Twist_Compensation.po, string 11