Zen

Translation

Stepper motor drivers on Klipper require a `rotation_distance` parameter in each [stepper config section](Config_Reference.md#stepper). The `rotation_distance` is the amount of distance that the axis moves with one full revolution of the stepper motor. This document describes how one can configure this value.
302/3100 · 310

Sign in to save the translation.

English Turkish Actions
Stepper motor drivers on Klipper require a `rotation_distance` parameter in each [stepper config section](Config_Reference.md#stepper). The `rotation_distance` is the amount of distance that the axis moves with one full revolution of the stepper motor. This document describes how one can configure this value.
Klipper üzerindeki step motor sürücüleri, her [adım yapılandırma bölümünde](Config_Reference.md#stepper) bir "rotation_distance" parametresi gerektirir. "rotation_distance", step motorun bir tam dönüşünde eksenin hareket ettiği mesafe miktarıdır. Bu belge, bu değerin nasıl yapılandırılacağını açıklar.
Obtaining rotation_distance from steps_per_mm (or step_distance)
Step_per_mm'den (veya step_distance) rotasyon_distance'ının elde edilmesi
The designers of your 3d printer originally calculated `steps_per_mm` from a rotation distance. If you know the steps_per_mm then it is possible to use this general formula to obtain that original rotation distance:
 
Or, if you have an older Klipper configuration and know the `step_distance` parameter you can use this formula:
 
The `<full_steps_per_rotation>` setting is determined from the type of stepper motor. Most stepper motors are "1.8 degree steppers" and therefore have 200 full steps per rotation (360 divided by 1.8 is 200). Some stepper motors are "0.9 degree steppers" and thus have 400 full steps per rotation. Other stepper motors are rare. If unsure, do not set full_steps_per_rotation in the config file and use 200 in the formula above.
 
The `<microsteps>` setting is determined by the stepper motor driver. Most drivers use 16 microsteps. If unsure, set `microsteps: 16` in the config and use 16 in the formula above.
 

Loading…

User avatar yazkili

Suggestion accepted

  1. Klipper
  2. Rotation_Distance
  3. Turkish
Stepper motor drivers on Klipper require a `rotation_distance` parameter in each [stepper config section](Config_Reference.md#stepper). The `rotation_distance` is the amount of distance that the axis moves with one full revolution of the stepper motor. This document describes how one can configure this value.
Klipper üzerindeki step motor sürücüleri, her [adım yapılandırma bölümünde](Config_Reference.md#stepper) bir "rotation_distance" parametresi gerektirir. "rotation_distance", step motorun bir tam dönüşünde eksenin hareket ettiği mesafe miktarıdır. Bu belge, bu değerin nasıl yapılandırılacağını açıklar.
a year ago
User avatar yazkili

Suggestion added

  1. Klipper
  2. Rotation_Distance
  3. Turkish
Stepper motor drivers on Klipper require a `rotation_distance` parameter in each [stepper config section](Config_Reference.md#stepper). The `rotation_distance` is the amount of distance that the axis moves with one full revolution of the stepper motor. This document describes how one can configure this value.
Klipper üzerindeki step motor sürücüleri, her [adım yapılandırma bölümünde](Config_Reference.md#stepper) bir "rotation_distance" parametresi gerektirir. "rotation_distance", step motorun bir tam dönüşünde eksenin hareket ettiği mesafe miktarıdır. Bu belge, bu değerin nasıl yapılandırılacağını açıklar.
a year ago
Browse all string changes

Things to check

Markdown syntax

Markdown syntax does not match source

Reset

Glossary

English Turkish
Klipper Klipper

String information

Screenshot context
Screenshot 2021-06-21 at 20-44-09 KevinOConnor klipper-translations
Flags
md-text
String age
2 years ago
Last updated
12 months ago
Source string age
2 years ago
Translation file
docs/locales/tr/LC_MESSAGES/Rotation_Distance.po, string 1