Klipper/Bootloader_Entry — Italian @ Hosted Weblate: CANBUS

	English	Italian	Actions
	Because this message must be the only thing in the "block" it is received in, prefixing an extra sync character can increase reliability if other tools were previously accessing the serial port.
	Shell
	stty <BAUD> < /dev/<DEVICE> echo $'~ \x1c Request Serial Bootloader!! ~' >> /dev/<DEVICE>
	Where `<DEVICE>` is your serial port, such as `/dev/ttyS0`, or `/dev/serial/by-id/gpio-serial2`, and
	`<BAUD>` is the baud rate of the serial port, such as `115200`.
	CANBUS
	If CANBUS is in use, a special [admin message](CANBUS_protocol.md#admin-messages) will request the bootloader. This message will be respected even if the device already has a nodeid, and will also be processed if the mcu is shutdown.
	This method also applies to devices operating in [CANBridge](CANBUS.md#usb-to-can-bus-bridge-mode) mode.
	Katapult's flashtool.py
	python3 ./katapult/scripts/flashtool.py -i <CAN_IFACE> -u <UUID> -r
	Where `<CAN_IFACE>` is the can interface to use. If using `can0`, both the `-i` and `<CAN_IFACE>` may be omitted.

Loading…

None

String updated in the repository

English

Italian 0 characters edited Current translation Empty

7 months ago

This string has more than one translation in this project or is untranslated in some components.

English	Italian
No related strings found in the glossary.

md-text

7 months ago

7 months ago

7 months ago

docs/locales/it/LC_MESSAGES/Bootloader_Entry.po, string 24