Debian Installation Guide/Using-D-I — Chinese (Simplified) @ Hosted Weblate: From &debian-gnu; 7.0 (<quote>Wheezy</quote>) onwards, &d-i; supports IPv6 as well …

Translation

English Tag: para

Chinese (Simplified)

Needs editing

Skip

	English	Chinese (Simplified)	Actions
	By default, &d-i; tries to configure your computer's network automatically as far as possible. If the automatic configuration fails, that may be caused by many factors ranging from an unplugged network cable to missing infrastructure for automatic configuration. For further explanation in case of errors, check the error messages on the fourth console. In any case, you will be asked if you want to retry, or if you want to perform a manual setup. Sometimes the network services used for autoconfiguration can be slow in their responses, so if you are sure everything is in place, simply start the autoconfiguration attempt again. If autoconfiguration fails repeatedly, you can instead choose the manual network setup.	默认情况下，&d-i; 会尽力自动配置您的计算机网络。如果自动配置失败，会有多种因素造成，从没有插好网线到错误的自动配置环境都有。要了解更多的出错原因，请检查第四控制台上的信息。不管是什么情况，都会要求您再试一次，或者让您选择手动设置。有时用于网络自动配置的网络服务器响应比较慢，假如您确信都配置正确，可以简单地再重新进行一次自动配置。要是自动配置还是失败，您可以换成手动网络设置方式。
	Manual network configuration	手动网络配置
	The manual network setup in turn asks you a number of questions about your network, notably <computeroutput>IP address</computeroutput>, <computeroutput>Netmask</computeroutput>, <computeroutput>Gateway</computeroutput>, <computeroutput>Name server addresses</computeroutput>, and a <computeroutput>Hostname</computeroutput>. Moreover, if you have a wireless network interface, you will be asked to provide your <computeroutput>Wireless ESSID</computeroutput> (<quote>wireless network name</quote>) and a <computeroutput>WEP key</computeroutput> or <computeroutput>WPA/WPA2 passphrase</computeroutput>. Fill in the answers from <xref linkend="needed-info"/>.	手动配置网络会依次询问一些网络问题，特别是 <computeroutput>IP 地址(IP address)</computeroutput>、<computeroutput>网络掩码(Netmask)</computeroutput>、<computeroutput>网关(Gateway)</computeroutput>、<computeroutput>域名服务器地址(Name server addresses)</computeroutput>，以及<computeroutput>主机名(Hostname)</computeroutput>。另外，如果您有无线网卡，会被要求提供<computeroutput>Wireless ESSID</computeroutput> (<quote>无线网络名</quote>) 和 <computeroutput> WEP 密钥(WEP key)</computeroutput> 或者 <computeroutput>WPA/WPA2 密码(WPA/WPA2 passphrase)</computeroutput>。填写答案 <xref linkend="needed-info"/>。
	Some technical details you might, or might not, find handy: the program assumes the network IP address is the bitwise-AND of your system's IP address and your netmask. The default broadcast address is calculated as the bitwise OR of your system's IP address with the bitwise negation of the netmask. It will also guess your gateway. If you can't find any of these answers, use the offered defaults — if necessary, you can change them by editing <filename>/etc/network/interfaces</filename> once the system has been installed.	您也许需要将一些技术细节放在手边：程序假定网络 IP 地址是您系统的 IP 地址和网络掩码按位与。默认的广播地址是通过您系统的 IP 地址和按位反网络掩码按位或计算得来。它也会猜测您的网关。如果您不能回答这些问题，让系统猜测 — 如果需要，在系统安装完毕之后，通过编辑 <filename>/etc/network/interfaces</filename> 文件进行修改。
	IPv4 and IPv6	IPv4 和 IPv6
	From &debian-gnu; 7.0 (<quote>Wheezy</quote>) onwards, &d-i; supports IPv6 as well as the <quote>classic</quote> IPv4. All combinations of IPv4 and IPv6 (IPv4-only, IPv6-only and dual-stack configurations) are supported.	从 &debian-gnu; 7.0 (<quote>Wheezy</quote>) 以后，&d-i; 将同时支持 IPv6 和 <quote>经典的</quote> IPv4。IPv4 与 IPv6 的各种组合(仅 IPv4、仅 IPv6 和双栈 dual-stack 配置)都将被支持。
	Autoconfiguration for IPv4 is done via DHCP (Dynamic Host Configuration Protocol). Autoconfiguration for IPv6 supports stateless autoconfiguration using NDP (Neighbor Discovery Protocol, including recursive DNS server (RDNSS) assignment), stateful autoconfiguration via DHCPv6 and mixed stateless/stateful autoconfiguration (address configuration via NDP, additional parameters via DHCPv6).	IPv4 通过 DHCP (Dynamic Host Configuration Protocol)进行自动配置。自动配置 IPv6 使用 NDP (Neighbor Discovery Protocol，包括 recursive DNS server (RDNSS) 设置) 支持无状态自动配置，有状态自动配置通过 DHCPv6 和混合自动配置(地址配置使用 NDP，额外参数使用 DHCPv6)。
	Setting Up Users And Passwords	设置用户和密码
	Just before configuring the clock, the installer will allow you to set up the <quote>root</quote> account and/or an account for the first user. Other user accounts can be created after the installation has been completed.	在设置时钟之前，安装程序允许您创建 <quote>root</quote> 帐号和/或第一个用户帐号。其他的用户帐号可以在安装完成之后创建。
	Set the Root Password	设置 root 密码
	The <emphasis>root</emphasis> account is also called the <emphasis>super-user</emphasis>; it is a login that bypasses all security protection on your system. The root account should only be used to perform system administration, and only used for as short a time as possible.	<emphasis>root</emphasis> 帐户也被称为<emphasis>超级用户</emphasis>；系统中的所有的安全防护措施对以该身份登录的都是无效的。root 帐户应该仅用来进行系统管理，而且使用时间应该尽可能短。

Loading…

tonywang5

Translation changed

English

Chinese (Simplified) 4 characters edited Current translation

3 years ago

Browse all string changes

Things to check

Consecutive duplicated words

Text contains the same word twice in a row: IPv4

Reset

Glossary

English	Chinese (Simplified)
No related strings found in the glossary.

String information

Source string description

Tag: para

Flags

ignore-newline-count, ignore-same, ignore-translated, no-c-format

Source string location

using-d-i.xml:835

String age

4 years ago

Last updated

a year ago

Source string age

4 years ago

Translation file

po/zh_CN/using-d-i.po, string 115