LinuxCNC/LinuxCNC/Gmocappy — Czech @ Hosted Weblate: an X and an Z axis

	English	Czech	Actions
	Press to run macro {0}	spustit makro {0}
	Press to display next macro button	zobrazit další tlačítka maker
	Press to display the virtual keyboard	zobrazit virtuální klávesnici
	* GMOCCAPY ERROR *	** GMOCCAPY CHYBA **
	this is not a lathe, as a lathe must have at least	toto není soustruh, je potřeba mít alespoň
	an X and an Z axis	osu X a Z
	Wrong lathe configuration, we will leave here	Špatná konfigurace soustruhu, program bude ukončen
	Very critical situation	Velmi kritická situace
	this is not a usual config	toto není obvyklá konfigurace
	we miss one of X , Y or Z axis	chybí jedna z os X, Y, nebo Z
	We will use by axisletter ordered jog button	použije se písmeno osy přiřazené k manuálnímu (jog) tlačítku

Loading…

None String updated in the repository LinuxCNC LinuxCNC/Gmocappy Czech	English an X and an Z axis Czech 0 characters edited Current translation Needs editing osu X a Z a year ago
None String updated in the repository LinuxCNC LinuxCNC/Gmocappy Czech	English an X and an Z axis Czech 0 characters edited Current translation Translated osu X a Z a year ago
None String updated in the repository LinuxCNC LinuxCNC/Gmocappy Czech	English an X and an Z axis Czech 0 characters edited Current translation Needs editing osu X a Z a year ago
nijel Translation changed LinuxCNC LinuxCNC/Gmocappy Czech	English an X and an Z axis Czech 2 characters edited Current translation Translated osu X a Z a year ago
nijel Contributor joined LinuxCNC LinuxCNC/Gmocappy Czech	Contributor joined a year ago
None String updated in the repository LinuxCNC LinuxCNC/Gmocappy Czech	English an X and an Z axis Czech 11 characters edited Translated osu X a Z a year ago