LinuxCNC/LinuxCNC — Chinese (Traditional) @ Hosted Weblate: Splines may not have motion in A, B, or C

English

Chinese (Traditional)

Needs editing

Skip

	English	Chinese (Traditional)	Actions
	Must specify nurbs K number for every Control Point	必須指定積極重量P為每一個控制點
	nurbs K number is not an integer	Q 編號在 G10 是不是整數
	Cannot make a nurbs with 0 feedrate	不能作出NURBS使用進給速度0
	You must specify a number of control points at least equal to the order P = %d	您必須指定一個數字控制點至少等於順序L =％d
	Cannot convert spline with cutter radius compensation	無法轉換樣條曲線有刀具半徑補償
	Splines may not have motion in A, B, or C	樣條曲線無法有動作在 Z，A，B 或 C
	Must specify both I and J with G5.1 or G6.1	必須同時指定I和J使用 G5.1
	Must specify both I and J, or neither	必須同時指定 I和J，或者兩者都不要
	Must specify both P and Q with G5	必須同時指定P和Q使用 G5
	The move just after exiting cutter compensation mode must be straight, not an arc	移動只是在退出刀具補償模式必須是直的，而不是一個弧
	Cannot do an arc in planes G17.1, G18.1, or G19.1

Loading…

None

String updated in the repository

English

Chinese (Traditional) 25 characters edited Current translation Needs editing

a year ago

Translation contains double space

English	Chinese (Traditional)
No related strings found in the glossary.

ignore-begin-space, ignore-end-newline, ignore-end-space

a year ago

a year ago

a year ago

src/po/zh_TW.po, string 58