The translation is temporarily closed for contributions due to maintenance, please come back later.
This project is in a trial period, be cautious while contributing. Setup can still change before being approved as a libre project.
Zen

Source string Source string

CHARGE_THRESH_BAT0__GROUP_DESCRIPTION
931/10000 · 931

This translation is currently locked.

Context English Actions
USB_BLACKLIST_PRINTER__ID_DESCRIPTION
Printers are excluded from USB autosuspend
USB_BLACKLIST_WWAN__ID_DESCRIPTION
WWAN devices are excluded from autosuspend.
Note: works for ids 05c6:* 0bdb:* 1199:* only
USB_WHITELIST__ID_DESCRIPTION
Include listed devices into autosuspend even if already excluded
by the driver or WWAN blacklists above (separate with spaces).
Use lsusb to get the ids
USB_AUTOSUSPEND_DISABLE_ON_SHUTDOWN__ID_DESCRIPTION
Set to disable autosuspend before shutdown / otherwise to do nothing
(workaround for USB devices that cause shutdown problems)
ThinkPad Battery__CATEGORY_TITLE
ThinkPad Battery
CHARGE_THRESH_BAT0__GROUP_DESCRIPTION
Battery Care -- Charge thresholds
Charging starts when the charge level is below the START_CHARGE_THRESH value when the charger is connected. It stops when the STOP_CHARGE_THRESH value is reached.
Required hardware: Lenovo ThinkPads and select other laptop brands are driven via specific plugins, the actual support status is shown by tlp-stat -b.
For more explanations and vendor specific details refer to https://linrunner.de/tlp/settings/battery.html
Notes:
- ThinkPads may require external kernel module(s), refer to the output of tlp-stat -b
- Vendor specific parameter value ranges are shown by tlp-stat -b
- If your hardware supports a start *and* a stop threshold, you must specify both, otherwise TLP will refuse to apply the single threshold
- If your hardware supports only a stop threshold, set the start value to 0

BAT0: Primary / Main / Internal battery (values in %)
Note: also use for batteries BATC, BATT and CMB0
CHARGE_THRESH_BAT1__GROUP_DESCRIPTION
BAT1: Secondary / Ultrabay / Slice / Replaceable battery (values in %)
RESTORE_THRESHOLDS_ON_BAT__ID_DESCRIPTION
Restore charge thresholds when AC is unplugged
NATACPI_ENABLE__ID_DESCRIPTION
Control battery care drivers: 0=disable, 1=enable
TPACPI_ENABLE__ID_DESCRIPTION
ThinkPad battery drivers: 0=disable, 1=enable
TPSMAPI_ENABLE__ID_DESCRIPTION
ThinkPad battery drivers: 0=disable, 1=enable
Context English Actions
AHCI_RUNTIME_PM_TIMEOUT__ID_DESCRIPTION
Seconds of inactivity before disk is suspended
Audio__CATEGORY_TITLE
Audio
BAY_DEVICE__ID_DESCRIPTION
Optical drive device to power off (default sr0)
BAY_POWEROFF__GROUP_DESCRIPTION
Power off optical drive in UltraBay/MediaBay: 0=disable, 1=enable.
Drive can be powered on again by releasing (and reinserting) the eject lever
or by pressing the disc eject button on newer models.
Note: an UltraBay/MediaBay hard disk is never powered off
BAY_POWEROFF_ON_BAT__ID_DESCRIPTION
Set to power off optical drive in UltraBay/MediaBay when running on battery.
Otherwise this feature is disabled (Default).
Drive can be powered on again by releasing (and reinserting) the
eject lever or by pressing the disc eject button on newer models.
Note: an UltraBay/MediaBay hard disk is never powered off
CHARGE_THRESH_BAT0__GROUP_DESCRIPTION
Battery Care -- Charge thresholds
Charging starts when the charge level is below the START_CHARGE_THRESH value when the charger is connected. It stops when the STOP_CHARGE_THRESH value is reached.
Required hardware: Lenovo ThinkPads and select other laptop brands are driven via specific plugins, the actual support status is shown by tlp-stat -b.
For more explanations and vendor specific details refer to https://linrunner.de/tlp/settings/battery.html
Notes:
- ThinkPads may require external kernel module(s), refer to the output of tlp-stat -b
- Vendor specific parameter value ranges are shown by tlp-stat -b
- If your hardware supports a start *and* a stop threshold, you must specify both, otherwise TLP will refuse to apply the single threshold
- If your hardware supports only a stop threshold, set the start value to 0

BAT0: Primary / Main / Internal battery (values in %)
Note: also use for batteries BATC, BATT and CMB0
CHARGE_THRESH_BAT1__GROUP_DESCRIPTION
BAT1: Secondary / Ultrabay / Slice / Replaceable battery (values in %)
CPU_BOOST__GROUP_DESCRIPTION
Set the CPU "turbo boost" (Intel) or "turbo core" (AMD) feature:
- 0=disable, 1=allow.
Note: a value of 1 does *not* activate boosting, it just allows it
CPU_DRIVER_OPMODE__GROUP_DESCRIPTION
Select a CPU scaling driver operation mode.
Intel CPU with intel_pstate driver: active, passive
AMD Zen 2 or newer CPU with amd-pstate_driver as of kernel 6.3/6.4:
active, passive, guided
CPU_ENERGY_PERF_POLICY__GROUP_DESCRIPTION
Set Intel CPU energy/performance policies HWP.EPP and EPB:
- performance, balance_performance, default, balance_power, power.
Values are given in order of increasing power saving.
Notes:
- HWP.EPP: requires kernel 4.10, intel_pstate scaling driver and Intel Core i 6th gen. or newer CPU
- EPB: requires kernel 5.2 or module msr and x86_energy_perf_policy from linux-tools, intel_pstate or intel_cpufreq scaling driver and Intel Core i 2nd gen. or newer CPU
- When HWP.EPP is available, EPB is not set

Loading…

User avatar None

String added in the repository

  1. TLPUI
  2. configdescriptions
  3. English
Battery Care -- Charge thresholds
Charging starts when the charge level is below the START_CHARGE_THRESH value when the charger is connected. It stops when the STOP_CHARGE_THRESH value is reached.
Required hardware: Lenovo ThinkPads and select other laptop brands are driven via specific plugins, the actual support status is shown by tlp-stat -b.
For more explanations and vendor specific details refer to https://linrunner.de/tlp/settings/battery.html
Notes:
- ThinkPads may require external kernel module(s), refer to the output of tlp-stat -b
- Vendor specific parameter value ranges are shown by tlp-stat -b
- If your hardware supports a start *and* a stop threshold, you must specify both, otherwise TLP will refuse to apply the single threshold
- If your hardware supports only a stop threshold, set the start value to 0

BAT0: Primary / Main / Internal battery (values in %)
Note: also use for batteries BATC, BATT and CMB0
Battery Care -- Charge thresholds
Charging starts when the charge level is below the START_CHARGE_THRESH value when the charger is connected. It stops when the STOP_CHARGE_THRESH value is reached.
Required hardware: Lenovo ThinkPads and select other laptop brands are driven via specific plugins, the actual support status is shown by tlp-stat -b.
For more explanations and vendor specific details refer to https://linrunner.de/tlp/settings/battery.html
Notes:
- ThinkPads may require external kernel module(s), refer to the output of tlp-stat -b
- Vendor specific parameter value ranges are shown by tlp-stat -b
- If your hardware supports a start *and* a stop threshold, you must specify both, otherwise TLP will refuse to apply the single threshold
- If your hardware supports only a stop threshold, set the start value to 0

BAT0: Primary / Main / Internal battery (values in %)
Note: also use for batteries BATC, BATT and CMB0
4 months ago
Browse all string changes

Things to check

Multiple failing checks

Following checks are failing:
Mismatching line breaks: Turkish, Chinese (Simplified), Chinese (Traditional), German, Spanish, French, Indonesian, Indonesian, Portuguese (Brazil), Russian

Reset

Unpluralised

The string is used as plural, but not using plural forms

Reset

Glossary

English English
No related strings found in the glossary.

String information

Context
CHARGE_THRESH_BAT0__GROUP_DESCRIPTION
Flags
read-only
Source string location
configschema.json.h:89
String age
4 months ago
Last updated
4 months ago
Source string age
4 months ago
Translation file
tlpui/lang/en_EN/LC_MESSAGES/configdescriptions.po, string 89