Toggle navigation
Hosted Weblate
Dashboard
Projects
Browse all projects
Languages
Browse all languages
Checks
Checks overview
Register
Sign in
Help
Get help
Contact
About Weblate
Documentation
Contribute to Weblate
Donate to Weblate
Klipper
Bed_Mesh
Screenshots
Screenshot 2021-06-20 at 21-03-41 KevinOConnor klipper-translations
Assigned source strings
English
Location
Assigned screenshots
Actions
Mesh Fade
1
View
When "fade" is enabled Z adjustment is phased out over a distance defined by the configuration. This is accomplished by applying small adjustments to the layer height, either increasing or decreasing depending on the shape of the bed. When fade has completed, Z adjustment is no longer applied, allowing the top of the print to be flat rather than mirror the shape of the bed. Fade also may have some undesirable traits, if you fade too quickly it can result in visible artifacts on the print. Also, if your bed is significantly warped, fade can shrink or stretch the Z height of the print. As such, fade is disabled by default.
1
View
`
fade_start: 1
`
*
Default Value: 1
*
The Z height in which to start phasing out adjustment. It is a good idea to get a few layers down before starting the fade process.
1
View
`
fade_end: 10
`
*
Default Value: 0
*
The Z height in which fade should complete. If this value is lower than
`
fade_start
`
then fade is disabled. This value may be adjusted depending on how warped the print surface is. A significantly warped surface should fade out over a longer distance. A near flat surface may be able to reduce this value to phase out more quickly. 10mm is a sane value to begin with if using the default value of 1 for
`
fade_start
`
.
1
View
Image
Screenshot details
Created
2 years ago
Uploaded by
dingyifei
Language
English
×
Close