Translation status

45 Strings 100%
Browse Translate
1,506 Words 100%
8,900 Characters 100%

Strings status

Strings Words Characters
45 1,506 8,900
All strings Browse Translate Zen
7 157 1,040
Approved strings Browse Translate Zen
45 1,506 8,900
Translated strings Browse Translate Zen
38 1,349 7,860
Strings waiting for review Browse Translate Zen
45 1,506 8,900
Strings without a label Browse Translate Zen

Overview

Project website www.klipper3d.org
Instructions for translators

The code blocks are included in the Gettext files in case if some comments need to be translated. You can add comments as well.

For code blocks without comment, please flag them as ignore-same, if you don't the permission, comment in a GitHub PR to let me know. For links that refer to a title inside an md file, please add a Link Modification Req tag.

The Gettext and markdown files in docs/locales are specific for languages.

Check contributing for current guidelines.

To merge a translation into the main Klipper repository, certain requirements have to be met. We are still determining the requirements and no merging is planned. - Yifei Ding
Project maintainers User avatar kingu User avatar KevinOConnor User avatar Neko-vecter User avatar dingyifei
Translation license GNU General Public License v3.0 or later
Translation process
  • Translations can be made directly.
  • Translation suggestions can be made.
  • Translations are reviewed by dedicated reviewers.
  • Any authenticated user can contribute.
  • The translation uses bilingual files.
Source code repository https://github.com/Klipper3d/klipper-translations/
Repository branch translations
Last remote commit locales: Automated Gettext Update(Manually Triggered) 69d82c5ec
GitHub authored 3 weeks ago
Last commit in Weblate locales: Translated using Weblate (Russian) b77fa74f4
User avatar Mikazil authored 2 weeks ago
Weblate repository https://hosted.weblate.org/git/klipper/readme/
File mask docs/locales/*/LC_MESSAGES/Manual_Level.po
Translation file Download docs/locales/zh_Hans/LC_MESSAGES/Manual_Level.po
Last change July 23, 2022, 7:02 a.m.
Last author None
8 days ago

String statistics

Strings percent Hosted strings Words percent Hosted words Characters percent Hosted characters
Total 45 1,506 8,900
Approved 15% 7 10% 157 11% 1,040
Waiting for review 84% 38 89% 1,349 88% 7,860
Translated 100% 45 100% 1,506 100% 8,900
Needs editing 0% 0 0% 0 0% 0
Read-only 0% 0 0% 0 0% 0
Failing checks 0% 0 0% 0 0% 0
Strings with suggestions 0% 0 0% 0 0% 0
Untranslated strings 0% 0 0% 0 0% 0
Last 12 months Previous

Activity in last 12 months

9 changes 0 changes 16 changes 0 changes 4 changes 0 changes 25 changes 0 changes 0 changes 0 changes 0 changes 0 changes 0 changes 0 changes 0 changes 0 changes 0 changes 0 changes 0 changes 0 changes 0 changes 0 changes 0 changes 0 changes
Apr May Jun Jul Aug Sep Oct Nov Dec Jan Feb Mar

Quick numbers

0
Hosted words
0
Hosted strings
0%
Translated
0
Contributors
and previous 30 days

Trends of last 30 days

—
Hosted words
+100%
—
Hosted strings
+100%
—
Translated
+100%
—
Contributors
—
User avatar None

Resource updated

  1. Klipper
  2. Manual_Level
  3. Chinese (Simplified)
The “docs/locales/zh_Hans/LC_MESSAGES/Manual_Level.po” file was changed. a year ago
User avatar dingyifei

Translation changed

  1. Klipper
  2. Manual_Level
  3. Chinese (Simplified)
rear left screw must be turned clockwise 2 minutes (not need it's ok)
左后方的螺丝必须顺时针旋转2分钟（不必须，足够完美）。
a year ago
User avatar dingyifei

Translation added

  1. Klipper
  2. Manual_Level
  3. Chinese (Simplified)
rear left screw must be turned clockwise 2 minutes (not need it's ok)
左后方的螺丝必须顺时针旋转2分钟（不必须，足够完美）。
a year ago
User avatar dingyifei

Translation added

  1. Klipper
  2. Manual_Level
  3. Chinese (Simplified)
The `DIRECTION` parameter is useful if you can turn your bed adjustment screws in one direction only. For example, you might have screws that start tightened in their lowest (or highest) possible position, which can only be turned in a single direction, to raise (or lower) the bed. If you can only turn the screws clockwise, run `SCREWS_TILT_CALCULATE DIRECTION=CW`. If you can only turn them counter-clockwise, run `SCREWS_TILT_CALCULATE DIRECTION=CCW`. A suitable reference point will be chosen such that the bed can be leveled by turning all the screws in the given direction.
`DIRECTION` 参数在你只能朝一个方向旋转调平螺丝时很有用。例如，你可能从一些螺丝的最低（或最高）位置开始拧，只能向一个方向转动，以提高（或降低）床身。如果只能顺时针转动螺丝，运行`SCREWS_TILT_CALCULATE DIRECTION=CW` 。如果只能逆时针转动它们，运行`SCREWS_TILT_CALCULATE DIRECTION=CCW` 。将选择一个合适的参考点，使床可以通过向给定的方向转动所有的螺丝来调平。
a year ago
User avatar dingyifei

Translation added

  1. Klipper
  2. Manual_Level
  3. Chinese (Simplified)
The screw1 is always the reference point for the others, so the system assumes that screw1 is at the correct height. Always run `G28` first and then run `SCREWS_TILT_CALCULATE` - it should produce output similar to:
螺丝1始终是其他螺丝的参考点，所以系统假定螺丝1处于正确的高度。总是先运行`G28` ，然后运行`SCREWS_TILT_CALCULATE` - 它应该产生类似如下的输出：
a year ago
User avatar dingyifei

Translation added

  1. Klipper
  2. Manual_Level
  3. Chinese (Simplified)
The `MAX_DEVIATION` parameter is useful when a saved bed mesh is used, to ensure that the bed level has not drifted too far from where it was when the mesh was created. For example, `SCREWS_TILT_CALCULATE MAX_DEVIATION=0.01` can be added to the custom start gcode of the slicer before the mesh is loaded. It will abort the print if the configured limit is exceeded (0.01mm in this example), giving the user a chance to adjust the screws and restart the print.
`MAX_DEVIATION`参数在使用保存的床网时可以确保床面调平结果没有从创建床网时的位置漂移太远。例如，`SCREWS_TILT_CALCULATE MAX_DEVIATION=0.01`可以在加载网格前添加到切片软件的自定义启动gcode中。如果超过了配置的限制（在这个例子中是0.01毫米），它将中止打印，给用户一个调整螺丝和重新开始打印的机会。
a year ago
User avatar dingyifei

Translation approved

  1. Klipper
  2. Manual_Level
  3. Chinese (Simplified)
rear right screw must be turned counter-clockwise 50 minutes
rear right screw must be turned counter-clockwise 50 minutes
a year ago
User avatar dingyifei

Translation approved

  1. Klipper
  2. Manual_Level
  3. Chinese (Simplified)
front right screw must be turned clockwise 1 full turn and a quarter turn
front right screw must be turned clockwise 1 full turn and a quarter turn
a year ago
User avatar dingyifei

Translation added

  1. Klipper
  2. Manual_Level
  3. Chinese (Simplified)
Note that "minutes" refers to "minutes of a clock face". So, for example, 15 minutes is a quarter of a full turn.
请注意，“分钟”是指“时钟上的分钟”。因此，例如，15分钟是完整一圈的四分之一。
a year ago
User avatar dingyifei

Translation approved

  1. Klipper
  2. Manual_Level
  3. Chinese (Simplified)
[screws_tilt_adjust]
screw1: -5, 30
screw1_name: front left screw
screw2: 155, 30
screw2_name: front right screw
screw3: 155, 190
screw3_name: rear right screw
screw4: -5, 190
screw4_name: rear left screw
horizontal_move_z: 10.
speed: 50.
screw_thread: CW-M3
[screws_tilt_adjust]
screw1: -5, 30
screw1_name: front left screw
screw2: 155, 30
screw2_name: front right screw
screw3: 155, 190
screw3_name: rear right screw
screw4: -5, 190
screw4_name: rear left screw
horizontal_move_z: 10.
speed: 50.
screw_thread: CW-M3
a year ago
Browse all translation changes