Source strings

426 Strings 100%
Browse Translate
7,807 Words 100%
59,296 Characters 100%
This translation is being used as source strings within this component.

Strings status

Strings Words Characters
426 7,807 59,296
All strings Browse Translate Zen
426 7,807 59,296
Read-only strings Browse Translate Zen
426 7,807 59,296
Strings without a label Browse Translate Zen

Overview

Project website www.klipper3d.org
Instructions for translators

The code blocks are included in the Gettext files in case if some comments need to be translated. You can add comments as well.

For code blocks without comment, please flag them as ignore-same, if you don't the permission, comment in a GitHub PR to let me know. For links that refer to a title inside an md file, please add a Link Modification Req tag.

The Gettext and markdown files in docs/locales are specific for languages.

Check contributing for current guidelines.

To merge a translation into the main Klipper repository, certain requirements have to be met. We are still determining the requirements and no merging is planned. - Yifei Ding
Project maintainers User avatar kingu User avatar KevinOConnor User avatar Neko-vecter User avatar dingyifei
Translation license GNU General Public License v3.0 or later
Translation process
  • Translations can be made directly.
  • Translation suggestions can be made.
  • Translations are reviewed by dedicated reviewers.
  • Any authenticated user can contribute.
  • The translation uses bilingual files.
Source code repository https://github.com/Klipper3d/klipper-translations/
Repository branch translations
Last remote commit locales: Automated Gettext Update(Manually Triggered) 69d82c5ec
GitHub authored 3 weeks ago
Last commit in Weblate locales: Translated using Weblate (Portuguese) 92894b70a
User avatar dieguesmosken authored 5 days ago
Weblate repository https://hosted.weblate.org/git/klipper/readme/
File mask docs/locales/*/LC_MESSAGES/G-Codes.po
Translation file Download docs/locales/en/LC_MESSAGES/G-Codes.pot
Last change April 3, 2024, 7:35 a.m.
Last author None
2 weeks ago

String statistics

Strings percent Hosted strings Words percent Hosted words Characters percent Hosted characters
Total 426 7,807 59,296
Approved 0% 0 0% 0 0% 0
Waiting for review 0% 0 0% 0 0% 0
Translated 100% 426 100% 7,807 100% 59,296
Needs editing 0% 0 0% 0 0% 0
Read-only 100% 426 100% 7,807 100% 59,296
Failing checks 0% 0 0% 0 0% 0
Strings with suggestions 0% 0 0% 0 0% 0
Untranslated strings 0% 0 0% 0 0% 0
Last 12 months Previous

Activity in last 12 months

14 changes 9 changes 10 changes 0 changes 26 changes 0 changes 4 changes 0 changes 0 changes 0 changes 5 changes 0 changes 9 changes 11 changes 0 changes 0 changes 3 changes 0 changes 0 changes 0 changes 3 changes 0 changes 0 changes 0 changes
Apr May Jun Jul Aug Sep Oct Nov Dec Jan Feb Mar

Quick numbers

0
Hosted words
0
Hosted strings
0%
Translated
0
Contributors
and previous 30 days

Trends of last 30 days

—
Hosted words
+100%
—
Hosted strings
+100%
—
Translated
+100%
—
Contributors
—
User avatar None

Resource updated

  1. Klipper
  2. G-Codes Glossary
  3. English
The “docs/locales/en/LC_MESSAGES/G-Codes.pot” file was changed. 3 weeks ago
User avatar None

String added in the repository

  1. Klipper
  2. G-Codes Glossary
  3. English
`SET_VELOCITY_LIMIT [VELOCITY=<value>] [ACCEL=<value>] [MINIMUM_CRUISE_RATIO=<value>] [SQUARE_CORNER_VELOCITY=<value>]`: This command can alter the velocity limits that were specified in the printer config file. See the [printer config section](Config_Reference.md#printer) for a description of each parameter.
`SET_VELOCITY_LIMIT [VELOCITY=<value>] [ACCEL=<value>] [MINIMUM_CRUISE_RATIO=<value>] [SQUARE_CORNER_VELOCITY=<value>]`: This command can alter the velocity limits that were specified in the printer config file. See the [printer config section](Config_Reference.md#printer) for a description of each parameter.
3 weeks ago
User avatar None

String added in the repository

  1. Klipper
  2. G-Codes Glossary
  3. English
`SET_PIN PIN=config_name VALUE=<value> [CYCLE_TIME=<cycle_time>]`: This command works similarly to [output_pin](#output_pin) SET_PIN commands. The command here supports setting an explicit cycle time using the CYCLE_TIME parameter (specified in seconds). Note that the CYCLE_TIME parameter is not stored between SET_PIN commands (any SET_PIN command without an explicit CYCLE_TIME parameter will use the `cycle_time` specified in the pwm_cycle_time config section).
`SET_PIN PIN=config_name VALUE=<value> [CYCLE_TIME=<cycle_time>]`: This command works similarly to [output_pin](#output_pin) SET_PIN commands. The command here supports setting an explicit cycle time using the CYCLE_TIME parameter (specified in seconds). Note that the CYCLE_TIME parameter is not stored between SET_PIN commands (any SET_PIN command without an explicit CYCLE_TIME parameter will use the `cycle_time` specified in the pwm_cycle_time config section).
3 weeks ago
User avatar None

String added in the repository

  1. Klipper
  2. G-Codes Glossary
  3. English
The following command is available when a [pwm_cycle_time config section](Config_Reference.md#pwm_cycle_time) is enabled.
The following command is available when a [pwm_cycle_time config section](Config_Reference.md#pwm_cycle_time) is enabled.
3 weeks ago
User avatar None

String added in the repository

  1. Klipper
  2. G-Codes Glossary
  3. English
[pwm_cycle_time]
[pwm_cycle_time]
3 weeks ago
User avatar None

String added in the repository

  1. Klipper
  2. G-Codes Glossary
  3. English
`SET_PIN PIN=config_name VALUE=<value>`: Set the pin to the given output `VALUE`. VALUE should be 0 or 1 for "digital" output pins. For PWM pins, set to a value between 0.0 and 1.0, or between 0.0 and `scale` if a scale is configured in the output_pin config section.
`SET_PIN PIN=config_name VALUE=<value>`: Set the pin to the given output `VALUE`. VALUE should be 0 or 1 for "digital" output pins. For PWM pins, set to a value between 0.0 and 1.0, or between 0.0 and `scale` if a scale is configured in the output_pin config section.
3 weeks ago
User avatar None

String added in the repository

  1. Klipper
  2. G-Codes Glossary
  3. English
`BED_MESH_OFFSET [X=<value>] [Y=<value>] [ZFADE=<value]`: Applies X, Y, and/or ZFADE offsets to the mesh lookup. This is useful for printers with independent extruders, as an offset is necessary to produce correct Z adjustment after a tool change. Note that a ZFADE offset does not apply additional z-adjustment directly, it is used to correct the `fade` calculation when a `gcode offset` has been applied to the Z axis.
`BED_MESH_OFFSET [X=<value>] [Y=<value>] [ZFADE=<value]`: Applies X, Y, and/or ZFADE offsets to the mesh lookup. This is useful for printers with independent extruders, as an offset is necessary to produce correct Z adjustment after a tool change. Note that a ZFADE offset does not apply additional z-adjustment directly, it is used to correct the `fade` calculation when a `gcode offset` has been applied to the Z axis.
3 weeks ago
User avatar None

String added in the repository

  1. Klipper
  2. G-Codes Glossary
  3. English
`BED_MESH_CALIBRATE [PROFILE=<name>] [METHOD=manual] [HORIZONTAL_MOVE_Z=<value>] [<probe_parameter>=<value>] [<mesh_parameter>=<value>] [ADAPTIVE=1] [ADAPTIVE_MARGIN=<value>]`: This command probes the bed using generated points specified by the parameters in the config. After probing, a mesh is generated and z-movement is adjusted according to the mesh. The mesh will be saved into a profile specified by the `PROFILE` parameter, or `default` if unspecified. See the PROBE command for details on the optional probe parameters. If METHOD=manual is specified then the manual probing tool is activated - see the MANUAL_PROBE command above for details on the additional commands available while this tool is active. The optional `HORIZONTAL_MOVE_Z` value overrides the `horizontal_move_z` option specified in the config file. If ADAPTIVE=1 is specified then the objects defined by the Gcode file being printed will be used to define the probed area. The optional `ADAPTIVE_MARGIN` value overrides the `adaptive_margin` option specified in the config file.
`BED_MESH_CALIBRATE [PROFILE=<name>] [METHOD=manual] [HORIZONTAL_MOVE_Z=<value>] [<probe_parameter>=<value>] [<mesh_parameter>=<value>] [ADAPTIVE=1] [ADAPTIVE_MARGIN=<value>]`: This command probes the bed using generated points specified by the parameters in the config. After probing, a mesh is generated and z-movement is adjusted according to the mesh. The mesh will be saved into a profile specified by the `PROFILE` parameter, or `default` if unspecified. See the PROBE command for details on the optional probe parameters. If METHOD=manual is specified then the manual probing tool is activated - see the MANUAL_PROBE command above for details on the additional commands available while this tool is active. The optional `HORIZONTAL_MOVE_Z` value overrides the `horizontal_move_z` option specified in the config file. If ADAPTIVE=1 is specified then the objects defined by the Gcode file being printed will be used to define the probed area. The optional `ADAPTIVE_MARGIN` value overrides the `adaptive_margin` option specified in the config file.
3 weeks ago
User avatar None

Resource updated

  1. Klipper
  2. G-Codes Glossary
  3. English
The “docs/locales/en/LC_MESSAGES/G-Codes.pot” file was changed. 6 months ago
User avatar None

String updated in the repository

  1. Klipper
  2. G-Codes Glossary
  3. English
`AXIS_TWIST_COMPENSATION_CALIBRATE [SAMPLE_COUNT=<value>]`: Initiates the X twist calibration wizard. `SAMPLE_COUNT` specifies the number of points along the X axis to calibrate at and defaults to 3.
`AXIS_TWIST_COMPENSATION_CALIBRATE [SAMPLE_COUNT=<value>]`: Initiates the X twist calibration wizard. `SAMPLE_COUNT` specifies the number of points along the X axis to calibrate at and defaults to 3.
6 months ago
Browse all translation changes